Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUZUKI2009EQUATOR SPORT, 4D PICKUP EXTRA CAB, 4WDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 13 (LIGHTING SYSTEMS)DIAGNOSTIC INFORMATION AND PROCEDURESSCAN TOOL DATA DEFINITIONS - LIGHTINGBCM INPUTS
2009 Suzuki Equator Sport, 4D Pickup Extra Cab, 4WD
BCM Inputs
2009 Suzuki Equator Sport, 4D Pickup Extra Cab, 4WDSECTION BCM Inputs
WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
BCM INPUTS REFERENCE
| Flash to Pass | The scan tool displays ON/OFF. When the multifunction switch is placed on the FTP position, the scan tool will display ON. |
| Front Fog Lamp Switch | The scan tool displays ON/OFF. When the fog lamp switch is placed in the ON position, the scan tool will display ON. |
| Hazard Switch Signal | The scan tool displays ON/OFF. When the hazard switch is placed in the ON position, the scan tool will display ON. |
| Headlamp OFF Switch | The scan tool displays ON/OFF. When the headlamp switch is placed in the OFF position, the scan tool will display ON. |
| High Beam Switch | The scan tool displays ON/OFF. When the headlamp dimmer switch is placed in the HIGH position, the scan tool will display ON. |
| Interior Light Switch | The scan tool displays ON/OFF. When the interior light switch is placed in the DOME position, the scan tool will display ON. |
| Interior Lights Power | The scan tool displays ON/OFF. When the interior lamps switch has voltage applied, the scan tool will display ON. |
| Left Turn Signal | The scan tool displays ON/OFF. When the turn signal switch is placed in the LEFT turn position, the scan tool will display ON. |
| Low Beam Switch | The scan tool displays ON/OFF. When the headlamp dimmer switch is placed in the LOW position, the scan tool will display ON. |
| LR Door Open Switch | The scan tool displays ON/OFF. When the LR door is open, the scan tool will display ON. |
| Park Brake Switch | The scan tool display ON/OFF. When the park brake is applied, the scan tool will display ON. |
| Park Lamp Switch | The scan tool displays ON/OFF. When the headlamp switch is in the PARK position, the scan tool will display ON. |
| RF Door Lock Switch | The scan tool displays ON/OFF. When the RF door is open, the scan tool will display ON. |
| RR Door Open Switch | The scan tool displays ON/OFF. When the RR door is open, the scan tool will display ON. |
| Right Turn Signal | The scan tool displays ON/OFF. When the turn signal switch is placed in the right turn position, the scan tool will display ON. |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.