SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUZUKI2009EQUATOR SPORT, 4D PICKUP EXTRA CAB, 4WDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 12 (POWER SEAT SYSTEM)REPAIR INSTRUCTIONSREAR SEAT SHOULDER BELT OPENING BEZEL REPLACEMENT
2009 Suzuki Equator Sport, 4D Pickup Extra Cab, 4WD

Rear Seat Shoulder Belt Opening Bezel Replacement

2009 Suzuki Equator Sport, 4D Pickup Extra Cab, 4WDSECTION Rear Seat Shoulder Belt Opening Bezel Replacement
WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Rear Seat No.1 Back Shoulder Belt Opening Bezel Screws & Back Release Handle
G04843023Courtesy of SUZUKI OF AMERICA CORP.
COMPONENTS REFERENCE

Callout Component Name
Preliminary Procedure 
Remove the rear center seat belt bolt. Refer to SEAT BELT REPLACEMENT - CENTER REAR .
1 Rear Seat No. 1 Back Shoulder Belt Opening Bezel Screw (Qty: 2)
CAUTION: Refer to FASTENER NOTICE .

Tightening torque 
2 N.m (18 lb in) 
Tip:  Lift up the seat belt to access the screws.
2 Rear Seat No. 1 Back Release Handle
Tip:  The bezel is integral to the rear center seat belt assembly and must be replaced as an assembly.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.