SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUZUKI2009EQUATOR SPORT, 4D PICKUP EXTRA CAB, 4WDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 12 (POWER SEAT SYSTEM)REPAIR INSTRUCTIONSFRONT SEAT REPLACEMENT - BUCKETREMOVAL PROCEDURE
2009 Suzuki Equator Sport, 4D Pickup Extra Cab, 4WD

Removal Procedure

2009 Suzuki Equator Sport, 4D Pickup Extra Cab, 4WDSECTION Removal Procedure
WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Front Seat Bucket
G04842989Courtesy of SUZUKI OF AMERICA CORP.
  1. Position the seat fully forward.
  2. Disconnect the shoulder belt from the seat quick disconnect feature by using a flat-bladed tool to press the tab.
    Fig 2: Identifying Front Seat Adjuster Bolts
    G04842990Courtesy of SUZUKI OF AMERICA CORP.
  3. Remove the front seat adjuster bolts.
  4. Move the seat to the full rearward position.
    Fig 3: Identifying Seat Electrical Connectors
    G04842991Courtesy of SUZUKI OF AMERICA CORP.
  5. Disconnect the seat electrical connectors.
  6. Lift the front seat adjuster hooks from the floor pan.
  7. Remove the seat from the vehicle.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.