Front Seat Cushion Inner Trim Panel Replacement (Non Fold Flat)

2009 Suzuki Equator Sport, 4D Pickup Extra Cab, 4WDSECTION Front Seat Cushion Inner Trim Panel Replacement (Non Fold Flat)
WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Front Seat Inner Adjuster Finish Panel & Front Seat Belt Buckle
G04842987Courtesy of SUZUKI OF AMERICA CORP.
COMPONENTS REFERENCE

Callout Component Name
1 Front Seat Belt Buckle Bolt
CAUTION: Refer to FASTENER NOTICE .

Tightening torque 
2 N.m (18 lb in) 
2 Front Seat Belt Buckle
Refer to FRONT SEAT BELT BUCKLE REPLACEMENT .
3 Front Seat Inner Adjuster Finish Panel Screw (Qty: 3)
Tightening torque 
2 N.m (18 lb in) 
4 Front Seat Inner Adjuster Finish Panel
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.