SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUZUKI2008XL-7 2WD V6-3.6LREPAIR AND DIAGNOSISENGINE, COOLING AND EXHAUSTENGINESERVICE AND REPAIROVERHAULCOMPONENT SERVICE AND INSPECTIONOIL PAN DISASSEMBLE
2008 Suzuki XL-7 2WD V6-3.6L

Oil Pan Disassemble

2008 Suzuki XL-7 2WD V6-3.6LSECTION Oil Pan Disassemble
Oil Pan Disassemble





1. Remove the oil pan drain plug.





2. Remove the oil pan scraper bolts.
3. Remove the oil pan scraper.





4. Remove the oil suction pipe bolts.
5. Remove the oil suction pipe.





6. Remove the oil suction tube seal from the oil suction tube. Discard the oil suction tube seal.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.