Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUZUKI2008XL-7 2WD V6-3.6LREPAIR AND DIAGNOSISDIAGRAMSCONNECTOR VIEWSMULTIPLE JUNCTION CONNECTORX400 - X499X410
2008 Suzuki XL-7 2WD V6-3.6L
X410
2008 Suzuki XL-7 2WD V6-3.6LSECTION X410
X410 Trailer Harness to the Trailer Jumper Harness (V92)
Connector Part Information
OEM: 72835889
Service: See Catalog
Description: 4-Way F 1.5 Sealed (BK)
Terminal Part Information
Pins: 1-3
Terminal/Tray: 7116-4102-08/9
Core/Insulation Crimp: E/1
Release Tool/Test Probe: 12094430/J-35616-2A (GY)
Pins: 4
Terminal/Tray: 7116-4103-08/9
Core/Insulation Crimp: E/1
Release Tool/Test Probe: 12094430/J-35616-2A (GY)
Connector Part Information
OEM: 72825889
Service: See Catalog
Description: 4-Way M 1.5 Sealed (BK)
Terminal Part Information
Pins: 1
Terminal/Tray: 7114-4103-08/9
Core/Insulation Crimp: E/1
Release Tool/Test Probe: 12094430/J-35616-3 (GY)
Pins: 2-4
Terminal/Tray: 7114-4102-08/9
Core/Insulation Crimp: E/1
Release Tool/Test Probe: 12094430/J-35616-3 (GY)
X410 Trailer Harness To The Trailer Jumper Harness (V92):
Connector Part Information
OEM: 72835889
Service: See Catalog
Description: 4-Way F 1.5 Sealed (BK)
Terminal Part Information
Pins: 1-3
Terminal/Tray: 7116-4102-08/9
Core/Insulation Crimp: E/1
Release Tool/Test Probe: 12094430/J-35616-2A (GY)
Pins: 4
Terminal/Tray: 7116-4103-08/9
Core/Insulation Crimp: E/1
Release Tool/Test Probe: 12094430/J-35616-2A (GY)
Connector Part Information
OEM: 72825889
Service: See Catalog
Description: 4-Way M 1.5 Sealed (BK)
Terminal Part Information
Pins: 1
Terminal/Tray: 7114-4103-08/9
Core/Insulation Crimp: E/1
Release Tool/Test Probe: 12094430/J-35616-3 (GY)
Pins: 2-4
Terminal/Tray: 7114-4102-08/9
Core/Insulation Crimp: E/1
Release Tool/Test Probe: 12094430/J-35616-3 (GY)
X410 Trailer Harness To The Trailer Jumper Harness (V92):
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.