Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Evaporative Emissions (EVAP) Hose Routing Diagram
2005 Suzuki Swift +SECTION Evaporative Emissions (EVAP) Hose Routing Diagram
| Callout | Component Name |
|---|---|
| 1 | Intake Manifold |
| 2 | Evaporative Emissions (EVAP) Canister Purge Solenoid Valve |
| 3 | Service Port |
| 4 | Evaporative Emissions (EVAP) Canister |
| 5 | Evaporative Emissions (EVAP) Canister Vent Solenoid Valve |
| 6 | Air Filter |
| 7 | Fresh Air Intake |
| 8 | Fuel Filler Cap |
| 9 | Fuel Filler Tube |
| 10 | Check Valve |
| 11 | Fuel Tank |
| 12 | Fuel Fill Vent Valve |
| 13 | Fuel Level at Shut-Off |
| 14 | Fuel Pressure Relief Valve |
| 15 | Fuel Tank Pressure Sensor |
| 16 | Rollover Valve |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.