Power Door Lock Actuator Inspection

2005 Suzuki Aerio LX, AWDSECTION Power Door Lock Actuator Inspection
  1. Disconnect power door lock actuator coupler.
  2. Connect battery positive (+) and negative (-) terminals to the door lock actuator terminals (a, b) as shown.

If it does not operate as specified in the following table, replace door lock actuator.

Fig 1: Connecting Battery Positive (+) And Negative (-) Terminals To Door Lock Actuator Terminals
G04016210Courtesy of SUZUKI OF AMERICA CORP.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.