Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUZUKI2001GRAND VITARA LTD 2WD V6-2.5LREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINECYLINDER BLOCK ASSEMBLYCONNECTING ROD, ENGINESERVICE SPECIFICATIONS
2001 Suzuki Grand Vitara LTD 2WD V6-2.5L
Service Specifications
2001 Suzuki Grand Vitara LTD 2WD V6-2.5LSECTION Service Specifications
Dimensions
| Connecting Rod Big-End Side Clearance | Standard | 0.25 - 0.40 |
| Limit | 0.45 | |
| Crank Pin Diameter | Standard | 49.982 - 50.000 |
| 0.25 mm Undersize | 49.732 - 49.750 |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.