Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Set/Coast Switch
When SET/COAST switch is depressed to ON position, and then released to OFF position while vehicle speed is 25-75 MPH, current vehicle speed is stored in CC ECU memory. The vehicle will maintain speed stored in CC ECU memory.
Depressing SET/COAST switch to ON position while vehicle is operating at speed stored, CC ECU memory will decrease vehicle speed as long as switch is depressed. When switch is released to OFF position, current vehicle speed is stored in CC ECU memory and vehicle will maintain stored vehicle speed.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.