Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
ACCEL/Resume Switch
When ACCEL/RESUME switch is rotated to ON position with vehicle moving, vehicle speed will continue to increase as long as switch is held in ON position. When switch is released, current vehicle speed is stored in CC ECU memory and vehicle maintains a constant operating speed. If vehicle speed is greater than 25 MPH after cruise control system operation is canceled, moving switch to ON position will resume speed at which vehicle was operating before cruise control system operation was canceled. The ACCEL/RESUME switch is part of multifunction switch located on steering column. See Figure .
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.