Quick Lookups: Fluids

2001 Suzuki Grand Vitara JLS, StandardSECTION Fluids
FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Compressor Oil w/o Rear AC 4.00 OZS. 0.11 L PAG 46 S
Air Cond Compressor Oil w/Rear A/C 7.00 OZS. 0.2 L PAG 46 S
Air Cond Refrigerant 1.15 LBS. 0.52 KG R-134a S
Automatic Transmission Fluid 2.65 QTS. 2.5 L Automatic Transmission Fluid DEXRON III When drained. S
Brake Fluid N/A N/A DOT 3 Brake Fluid Fill to "max" line on the reservoir. S
Clutch Fluid N/A N/A DOT 3 Brake Fluid Fill to "max" line on the reservoir. S
Differential Gear Oil Rear 2.30 QTS. 2.17 L API - GL-5, SAE 80W-90 Hypoid Gear Oil S
Engine Coolant G16B 5.80 QTS. 5.48 L 50/50 mixture of Ethylene Glycol Antifreeze and water S
Engine Coolant H25A 7.40 QTS. 7 L 50/50 mixture of Ethylene Glycol Antifreeze and water S
Engine Coolant J20A 6.90 QTS. 6.52 L 50/50 mixture of Ethylene Glycol Antifreeze and water S
Engine Oil w/Filter,G16B 4.40 QTS. 4.16 L API - SAE 5W-30 S
Engine Oil w/Filter,H25A 5.80 QTS. 5.48 L API - SAE 5W-30 S
Engine Oil w/Filter,J20A 5.50 QTS. 5.2 L API - SAE 5W-30 S
Fuel Tank 4 Door 17.40 GALS. 65.86 L S
Manual Transmission Fluid RWD 2.00 QTS. 1.89 L API - GL-4, SAE 75W-85, 75W-90, 80W-90 S
Power Steering Fluid N/A N/A Automatic Transmission Fluid DEXRON III Fill to "max" line on the reservoir. S
Transfer Case Fluid 1.80 QTS. 1.7 L API - GL-4, SAE 75W-85, 75W-90, 80W-90 S
Windshield Washer Fluid N/A N/A Use a good quality windshield washer fluid, diluted with water as necessary. S
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.