Throttle Position (TP) Sensor

2001 Suzuki Grand Vitara JLS, StandardSECTION Throttle Position (TP) Sensor
THROTTLE POSITION (TP) SENSOR RESISTANCE (1)

Application Ohms
Esteem & Swift
Between Terminals No. 1 & 2 2500-6000
Between Terminals No. 1 & 3 (2) 100-20,000
Grand Vitara
Between Terminals No. 1 & 3 4000-6000
Between Terminals No. 1 & 2 (2) 0-4600
Vitara
Between Terminals No. 1 & 3 4000-6000
Between Terminals No. 1 & 2 (2) 20-6000
(1) See Fig 1 for terminal identification.
(2) Depending on degree of throttle opening.
Fig 1: Identifying Throttle Position (TP) Sensor Terminals (Typical)
G98C10654Courtesy of SUZUKI OF AMERICA CORP.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.