SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUBARU2022IMPREZA BASE, 4D SEDAN, AUTOMATIC CVT TRANSREPAIR AND DIAGNOSISTRANSMISSIONTRANSMISSION CONTROL SYSTEMSMT GEAR SHIFT LEVERINSPECTION6MT MODEL
2022 Subaru Impreza Base, 4D Sedan, Automatic CVT Trans

6MT Model

2022 Subaru Impreza Base, 4D Sedan, Automatic CVT TransSECTION 6MT Model
  1. Check the parts for deformation, damage and wear. Repair or replace if necessary. Compare the removed parts with new parts to confirm if there are damages or not.
  2. Check that selecting to the reverse direction is disable unless the slider is pulled up.
  3. Check that selecting to the reverse direction is possible when the slider is pulled up to the full.
  4. Check that the shift lever moves to initial position, when the slider backs to "N" position from step 3.
    G13232387Courtesy of SUBARU OF AMERICA, INC.
  5. Move the shift lever to the neutral position, and check that the play in the select direction above the shift knob is within the reference standard. If not within the reference standard values, replace the MT gear shift lever. Ref. to CONTROL SYSTEMS>MT GEAR SHIFT LEVER>REMOVAL .

Play in neutral position: 

Reference standard 

1.5 mm (0.059 in) or less

G13232387Courtesy of SUBARU OF AMERICA, INC.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.