Oil Pump: Installation

2022 Subaru Impreza Base, 4D Sedan, Automatic CVT TransSECTION Installation
  1. Install the O-rings.
    NOTE:
    • Use new O-rings.Β 
    • Apply CVTF to the O-rings.Β 
    G08318182Courtesy of SUBARU OF AMERICA, INC.
  2. Install the plate and the oil pump.
    NOTE:

    Apply CVTF to the bolt.Β 

    Tightening torque:Β 

    8.5 N.m (0.9 kgf-m, 6.3 ft-lb)

    G11256035Courtesy of SUBARU OF AMERICA, INC.
  3. Install the oil pump chain cover. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION (TR580 IMPREZA)>OIL PUMP CHAIN>INSTALLATIONΒ .
  4. Install the torque converter assembly. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION (TR580 IMPREZA)>TORQUE CONVERTER ASSEMBLY>INSTALLATIONΒ .
  5. Install the transmission assembly to the vehicle. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION (TR580 IMPREZA)>AUTOMATIC TRANSMISSION ASSEMBLY>INSTALLATIONΒ .
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.