SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUBARU2022IMPREZA BASE, 4D SEDAN, AUTOMATIC CVT TRANSREPAIR AND DIAGNOSISTRANSMISSIONAUTOMATIC TRANSCVT TRANSAXLE (TR580)GENERAL DESCRIPTIONPREPARATION TOOLGENERAL TOOL
2022 Subaru Impreza Base, 4D Sedan, Automatic CVT Trans

General Tool

2022 Subaru Impreza Base, 4D Sedan, Automatic CVT TransSECTION General Tool
TOOL NAME REMARKS
Circuit tester Used for measuring resistance, voltage and current.
Thickness gauge Used for measuring the clearance in reverse brake, forward clutch and transfer clutch.
Caliper Used for measuring the dimension.
Spring scale Used for measuring the starting torque of the drive pinion.
TORX® bit T40 Used for removing the secondary pressure (line pressure) test plug.
TORX® bit T70 Used for removing and installing differential gear oil drain plug.
Straight pin remover Used for removing and installing the straight pin and spring pin.
Push/pull gauge Used for measuring clutch clearance.
Angle gauge Used for installing the drive plate.
Dial gauge
  • Used for measuring backlash. (Lever type)
  • Used together with magnet stand.
  • Used for assembling the reverse brake and forward clutch. (Spindle type)
  • Used together with magnet stand.
Magnet stand
  • Used for measuring backlash.
  • Used together with the dial gauge (lever type).
  • Used for assembling the reverse brake and forward clutch.
  • Used together with the dial gauge (spindle type).
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.