Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Check Shift Indicator
Diagnosis:
- CAN communication is abnormal with the combination meter.
- Combination meter malfunction
Trouble symptom:
- Shift indicator does not display or remains displayed.
- Shift indicator display does not change.
- CHECK DTC
.
Read the DTC of [Transmission] using the Subaru Select Monitor. Ref. to TRANSMISSION (DIAGNOSTICS) (IMPREZA MODEL)>DIAGNOSTIC TROUBLE CODE (DTC) .
Is DTC U0155 or U0423 displayed?
Yes: Perform the self-diagnosis of combination meter.
No: Go to 2.
- CHECK DTC
.
Read the DTC of [Transmission] using the Subaru Select Monitor. Ref. to TRANSMISSION (DIAGNOSTICS) (IMPREZA MODEL)>DIAGNOSTIC TROUBLE CODE (DTC) .
Are DTCs other than U0155 and U0423 displayed?
Yes: Perform the diagnosis according to the DTC. Ref. to TRANSMISSION (DIAGNOSTICS) (IMPREZA MODEL)>DIAGNOSTIC TROUBLE CODE (DTC)>LIST .
No: Go to 3.
- CHECK COMBINATION METER
.
Read the DTC of [Combination Meter] using the Subaru Select Monitor. Ref. to COMBINATION METER (DIAGNOSTICS)>DIAGNOSTIC TROUBLE CODE (DTC) .
Are any DTCs displayed?
Yes: Perform the diagnosis according to the DTC. Ref. to COMBINATION METER (DIAGNOSTICS)>DIAGNOSTIC TROUBLE CODE (DTC)>LIST .
No: Go to 4.
- CHECK TCM
.
- Operate the + side of the paddle shift switch.
- Using the Subaru Select Monitor, read data of [Up Switch] in the [Data Monitor] of [Transmission]. Ref. to TRANSMISSION (DIAGNOSTICS) (IMPREZA MODEL)>DATA MONITOR .
Does the display switch between [ON] and [OFF] according to the operation?
Yes: Go to 5.
No: Check for poor contact between TCM and paddle shift UP switch, and repair the defective part.
- CHECK TCM
.
- Operate the - side of the paddle shift switch.
- Using the Subaru Select Monitor, read data of [Down Switch] in the [Data Monitor] of [Transmission]. Ref. to TRANSMISSION (DIAGNOSTICS) (IMPREZA MODEL)>DATA MONITOR .
Does the display switch between [ON] and [OFF] according to the operation?
Yes: Go to 6.
No: Check for poor contact between TCM and paddle shift down switch, and repair the defective part.
- CHECK TCM
.
- Turn the ignition switch OFF, then turn it ON again.
- Shift the select lever to manual mode.
- Using the Subaru Select Monitor, read data of [Shift Step in Manual Mode] in the [Data Monitor] of [Transmission]. Ref. to TRANSMISSION (DIAGNOSTICS) (IMPREZA MODEL)>DATA MONITOR .
Is "1" displayed?
Yes: Go to 7.
No: Perform the diagnosis according to DTC P0951. Ref. to TRANSMISSION (DIAGNOSTICS) (IMPREZA MODEL)>DIAGNOSTIC PROCEDURE WITH DIAGNOSTIC TROUBLE CODE (DTC)>DTC P0951 AUTO SHIFT MANUAL CONTROL CIRCUIT RANGE/PERFORMANCE .
- CHECK TCM
.
- Shift up the select lever.
- Using the Subaru Select Monitor, read data of [Shift Step in Manual Mode] in the [Data Monitor] of [Transmission]. Ref. to TRANSMISSION (DIAGNOSTICS) (IMPREZA MODEL)>DATA MONITOR .
Is "2" displayed?
Yes: Current condition is normal.
No: Replace the TCM. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION (TR580 IMPREZA)>TRANSMISSION CONTROL MODULE (TCM) .
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.