SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUBARU2022IMPREZA BASE, 4D SEDAN, AUTOMATIC CVT TRANSREPAIR AND DIAGNOSISRESTRAINTSAIR BAG, SRSAIRBAG SYSTEMAIRBAG CONNECTORPROCEDUREAIRBAG CONTROL MODULE
2022 Subaru Impreza Base, 4D Sedan, Automatic CVT Trans

Airbag Control Module

2022 Subaru Impreza Base, 4D Sedan, Automatic CVT TransSECTION Airbag Control Module
  1. How to disconnect:
    1. Push the lock lever plate (a).
    2. While holding down the lock lever plate (a), pull the lever toward you.
      G10270437Courtesy of SUBARU OF AMERICA, INC.
  2. How to separate:
    1. Remove the lock plate (a) behind the integrated connector.
    2. Release the lock levers of the connectors, and pull out the connectors.
      G11245769Courtesy of SUBARU OF AMERICA, INC.
  3. How to connect:
    CAUTION:

    Be sure to insert the connector in until it is locked. Then pull it gently to make sure that it is locked. 

    Insert the connector and push the lock lever in securely.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.