SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUBARU2022IMPREZA BASE, 4D SEDAN, AUTOMATIC CVT TRANSREPAIR AND DIAGNOSISENGINE PERFORMANCETESTING & DIAGNOSISAUTO START STOP (DIAGNOSTICS)AUTO START STOP INDICATORCONDITION CHECK
2022 Subaru Impreza Base, 4D Sedan, Automatic CVT Trans

Condition Check

2022 Subaru Impreza Base, 4D Sedan, Automatic CVT TransSECTION Condition Check

The illumination status of the Auto Start Stop indicator, Auto Start Stop OFF indicator and Auto Start Stop deactivation indicator is related to the vehicle status as follows.

  • NORMAL METER MODEL
    G13942080Courtesy of SUBARU OF AMERICA, INC.
  • COLOR TFT METER MODEL
    G13942081Courtesy of SUBARU OF AMERICA, INC.
Vehicle condition Ignition switch ON When Auto Start Stop operation condition is not met During Auto Start Stop During Auto Start Stop cancellation(1) Malfunction occurs during Auto Start Stop.
Auto Start Stop indicator status Light OFF Light OFF ON (green) Light OFF Light OFF
Auto Start Stop OFF indicator status ON (yellow)(2) Light OFF Light OFF ON (yellow) Blink (yellow)
Auto Start Stop deactivation indicator status Light OFF Light ON Light OFF Light OFF Light OFF
(1) Following conditions
  • Auto Start Stop is cancelled by operating the Auto Start Stop cancel switch.
  • The conditions become out of the Auto Start Stop criteria during Auto Start Stop, and the system cannot restart.

(2) After engine is started, it goes off.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.