SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUBARU2022IMPREZA BASE, 4D SEDAN, AUTOMATIC CVT TRANSREPAIR AND DIAGNOSISENGINE MECHANICALSTARTERENGINE STARTING SYSTEM & CHARGING SYSTEM (EXCEPT FOR HEV)GENERATORDISASSEMBLY2.5 L MODEL
2022 Subaru Impreza Base, 4D Sedan, Automatic CVT Trans

2.5 L Model

2022 Subaru Impreza Base, 4D Sedan, Automatic CVT TransSECTION 2.5 L Model
  1. Remove the cover.
    G13199255Courtesy of SUBARU OF AMERICA, INC.
  2. Remove the terminal B.
    G13199256Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the rear cover.
    G13199257Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the brush holder.
    NOTE:

    Set the socket with suitable size etc. (a) to the brush holder, and slide the brush holder toward the socket etc. (a) to remove so that the brush does not pop out. 

    G13199258Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the IC regulator.
    G13199259Courtesy of SUBARU OF AMERICA, INC.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.