Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSSUBARU2022IMPREZA BASE, 4D SEDAN, AUTOMATIC CVT TRANSREPAIR AND DIAGNOSISELECTRICALGAUGESINSTRUMENTATION SYSTEM & DRIVER INFORMATION CENTERCOMBINATION METER SYSTEMOPERATIONLCD/TFT DISPLAY CHECK

2022 Subaru Impreza Base, 4D Sedan, Automatic CVT Trans

LCD/TFT Display Check

2022 Subaru Impreza Base, 4D Sedan, Automatic CVT TransSECTION LCD/TFT Display Check

Check the LCD/TFT display.

NOTE:

The meter needle indicate 0 or the lowest position.
ILL indication illuminates at the same brightness as immediately before entering "LCD/TFT display check".
For model with normal meter, after No. 14 is displayed in the illumination order, the display is repeated from No. 1 again.
For model with color TFT meter, after No. 8 is displayed in the illumination order, the display is repeated from No. 1 again. The version display contents of the illumination order No. 1 varies depending on the vehicle.

Press the trip reset switch.

After a buzzer sounds for 0.5 seconds and "STEP3" is displayed on LCD/TFT, the LCD/TFT display check mode is initiated.

Model with normal meter

Courtesy of SUBARU OF AMERICA, INC.

Model with color TFT meter

Order	TFT display	Warning/indicator light	Time (sec)
1	Version display & color gradation	Light OFF	10
2	Black	Light OFF	10
3	Red	Light OFF	10
4	Green	Light OFF	10
5	Blue	Light OFF	10
6	White	Light OFF	10
7	Color gradation	Light OFF	10
8	Cross talking	Light OFF	10

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.