SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUBARU2022IMPREZA BASE, 4D SEDAN, AUTOMATIC CVT TRANSREPAIR AND DIAGNOSISBRAKESTRACTION CONTROLVEHICLE DYNAMICS CONTROL (VDC) SYSTEMREAR ABS WHEEL SPEED SENSORREMOVAL
2022 Subaru Impreza Base, 4D Sedan, Automatic CVT Trans

Rear ABS Wheel Speed Sensor: Removal

2022 Subaru Impreza Base, 4D Sedan, Automatic CVT TransSECTION Removal
  1. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>REPAIR CONTENTS>NOTE>BATTERY .
    NOTE:

    For the hybrid model, disconnect the battery negative terminal. 

  2. Lift up the vehicle, and then remove the rear wheels.
  3. Remove the rear ABS wheel speed sensor.
    CAUTION:
    • Be careful not to damage the sensor. 
    • Do not apply excessive force to the sensor harness. 
    • Leave the sensor harness clamp on the vehicle side. 
    1. Disconnect the connector from the rear ABS wheel speed sensor.
    2. Remove the harness clamp and bolts, and remove the rear ABS wheel speed sensor from the rear axle housing.
      • Impreza model
        G12392630Courtesy of SUBARU OF AMERICA, INC.
      • Crosstrek model
        G12392631Courtesy of SUBARU OF AMERICA, INC.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.