System Inspection

2022 Subaru Impreza Base, 4D Sedan, Automatic CVT TransSECTION System Inspection
Symptoms Inspection order
Rear window defogger does not operate.
  1. Check the fuse.
  2. Check the rear defogger relay.
  3. Check the rear window defogger switch.
  4. Check the heat wire.
  5. Check the wiring harness.
  6. Check body integrated unit.
NOTE:

Rear window defogger system can be customized using the Subaru Select Monitor, when the customize setting [Auto A/C Setting] of the body integrated unit is set to With.Β 

System name Initial setting Customize setting
Rr Defogger op. mode Normal Continuous(1)
(1) When the battery voltage remains at 10 V or less for 30 seconds, the continuous operation is suspended and turned to the normal operation.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.