Check Microphone With Line Diag Mode

2022 Subaru Impreza Base, 4D Sedan, Automatic CVT TransSECTION Check Microphone With Line Diag Mode
  1. Turn the ignition switch to ACC.
  2. Press the button (b) twice with the button (a) pressed.
    G11246736Courtesy of SUBARU OF AMERICA, INC.
    NOTE:

    Pressing the button (a) for 3 seconds or more, or turning the ignition switch from the OFF to ACC position can exit the diagnostic mode.Β 

  3. {Line Diag} screen is displayed.
  4. Check the microphone level with {the Microphone} in the {Line Diag} screen.
    G12399555Courtesy of SUBARU OF AMERICA, INC.

    Check that the microphone input level varies depending on the sound and voice.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.