Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUBARU2022IMPREZA BASE, 4D SEDAN, AUTOMATIC CVT TRANSREPAIR AND DIAGNOSISACCESSORIES & EQUIPMENTCOMMUNICATION DEVICESBODY CONTROL SYSTEM (DIAGNOSTICS)DATA MONITORLIST
2022 Subaru Impreza Base, 4D Sedan, Automatic CVT Trans
Data Monitor: List
2022 Subaru Impreza Base, 4D Sedan, Automatic CVT TransSECTION List
| Item | Contents | Standard/Unit | Note |
|---|---|---|---|
| IGN Counter | Time stamp information. | 0 - 65534 Time | Ref. to LAN SYSTEM (DIAGNOSTICS) (EXCEPT FOR HEV)>GENERAL DESCRIPTION>CAUTION>TIME STAMP . Ref. to LAN SYSTEM (DIAGNOSTICS) (HEV)>GENERAL DESCRIPTION>CAUTION>TIME STAMP . |
| Count | Time stamp information. | Common/Originally | |
| IG-ON Elapsed Time | Time stamp information. | 0 - 53687091000 ms | |
| BATT voltage (control) | Constant power supply from the battery. Input value to the body integrated unit. | 0 - 21.5 V | - |
| BATT voltage (BACKUP) | Constant power supply from the battery. Input value to the body integrated unit. | 0 - 21.5 V | - |
| IGN voltage | IG system circuit voltage. Input value to the body integrated unit. | 0 - 21.5 V | - |
| ACC voltage | ACC system circuit voltage. Input value to the body integrated unit. | 0 - 21.5 V | - |
| Front Wheel Speed | Front wheel average speed. CAN data input value. Received from the VDC control module. | km/h | - |
| Shift Position | Shift position. CAN data input value. Received from the TCM. (Except for hybrid model)/Received from hybrid vehicle control ECU assembly. (Hybrid model) | 1 - 3, D-S, D, N, R, P (except for hybrid model)/D, N, R, P, 1 (for hybrid model) | - |
| Buzzer beeping request | Passenger room buzzer beeping request. CAN data output value. Sent to the combination meter. | Status for 'beeping deactivated' Reverse warning Key warning buzzer Light Remained Buzzer Customize 1 Customize 2 Registration completed 1 Registration completed 2 Registered Registration NG | - |
| EPB operating status | EPB operating status. CAN data input value, received from the VDC module. | Error Released Operate Operating Releasing Parking | - |
| Illumination Sensor Output | Output voltage from the illumination sensor. Body integrated unit input value. | 0 - 5 V | - |
| Off delay time | Interior light off delay time. Body integrated unit custom setting values. | OFF 10 Sec 20 Sec 30 Sec | - |
| Auto Light Sensitivity Adjustment | Sensitivity of auto light function. Body integrated unit custom setting values. | Dull Normal Sensitive Very Sensitive | - |
| Remote Trunk Open/Power Rear Gate Open Function | OFF/Twice Push/Long Push status of the keyless transmitter-operated power rear gate open/close function. Body integrated unit custom setting values. | OFF Twice Push Long Push | - |
| key-lock warning SW | ON/OFF status of the key warning switch. Body integrated unit input value. Set to ON when the ignition key is inserted. | ON/OFF | Model without keyless access with push button start system |
| ACC Input | ON/OFF status of ACC. Body integrated unit input value. Set to ON when the ignition switch is turned to ACC. | ON/OFF | Model with keyless access with push button start system |
| Stop Light Switch | ON/OFF status of the brake switch. Body integrated unit input value. Set to ON when the brake pedal is pressed. | ON/OFF | - |
| Front Fog Light SW input | ON/OFF status of the front fog light switch. Body integrated unit input value. Set to ON when the front fog light switch is ON. | ON/OFF | - |
| Driver's door SW input | ON/OFF status of the driver's door switch. Body integrated unit input value. Set to ON when the door is open. | ON/OFF | - |
| P-door SW input | ON/OFF status of the passenger's door switch. Body integrated unit input value. Set to ON when the door is open. | ON/OFF | - |
| Rear right door SW input | ON/OFF status of the rear right door switch. Body integrated unit input value. Set to ON when the door is open. | ON/OFF | - |
| Rear left door SW input | ON/OFF status of the rear left door switch. Body integrated unit input value. Set to ON when the door is open. | ON/OFF | - |
| R Gate SW input | Rear gate/trunk switch ON/OFF status. Body integrated unit input value. Set to ON when the rear gate/trunk is open. | ON/OFF | - |
| Manual lock SW input | ON/OFF status of the manual lock switch located on the power window main switch (or on the passenger's side power window switch). Body integrated unit input value. Set to ON when the manual lock switch is set to lock. | ON/OFF | - |
| Manual unlock SW input | ON/OFF status of the manual lock switch located on the power window main switch (or on the passenger's side power window switch). Body integrated unit input value. Set to ON when the manual lock switch is set to unlock. | ON/OFF | - |
| P SW | ON/OFF status of the P range switch. Body integrated unit input value. Set to ON in the P range. | ON/OFF | - |
| MT Reverse Switch | MT back-up light switch ON/OFF status. Body integrated unit input value. Set to ON when the shift lever is set to R range and the back-up light switch is ON. | ON/OFF | - |
| R wiper ON SW input | ON/OFF status of the rear wiper ON switch. Body integrated unit input value. Set to ON when the rear wiper switch is ON. | ON/OFF | - |
| R wiper INT SW input | ON/OFF status of the rear wiper INT switch. Body integrated unit input value. Set to ON when the rear wiper switch is in the INT position. | ON/OFF | - |
| R washer SW input | ON/OFF status of the rear washer switch. Body integrated unit input value. Set to ON when the rear washer switch is ON. | ON/OFF | - |
| Fr wiper input | ON/OFF status of the front wiper return switch. Body integrated unit input value. Set to ON when the front wiper is outside of the stop position. | ON/OFF | - |
| Parking Brake Switch Input | Parking brake switch ON/OFF status. Body integrated unit input value. Set to ON when the parking brake is pulled. | ON/OFF | - |
| Driver's seat lock status SW input | ON/OFF status of the driver's seat lock status switch. Body integrated unit input value. Set to ON when the door status is UNLOCK. | ON/OFF | Model with keyless access with push button start system |
| Passenger's seat lock status SW input | ON/OFF status of the passenger's seat lock status switch. Body integrated unit input value. Set to ON when the door status is UNLOCK. | ON/OFF | Model with keyless access with push button start system |
| R gate lock status SW input | ON/OFF status of the rear gate lock status switch. Body integrated unit input value. Set to ON when the rear gate status is LOCK. | ON/OFF | - |
| R Gate Release SW input | ON/OFF status of the rear gate release switch/trunk opener switch. Body integrated unit input value. Set to ON when the rear gate release switch/trunk opener switch is pressed. | ON/OFF | - |
| Rr Defogger output | ON/OFF status of the rear defogger relay output. Body integrated unit output value. Set to ON when the rear defogger is activated. | ON/OFF | - |
| lock actuator LOCK output | ON/OFF status of the door lock actuator output. Body integrated unit output value. Set to ON when a lock signal is output. | ON/OFF | - |
| All seat UNLOCK output | ON/OFF status of the all door lock actuator output. Body integrated unit output value. Set to ON when an all door unlock signal is output. | ON/OFF | - |
| D-seat UNLOCK output | ON/OFF status of the driver's door lock actuator output. Body integrated unit output value. Set to ON when a driver's door/all door unlock signal is output. | ON/OFF | - |
| Rear gate/Trunk UNLOCK output | Rear gate/trunk lock actuator ON/OFF status. Body integrated unit output value. Set to ON when an unlock signal is output. | ON/OFF | - |
| R wiper output | ON/OFF status of the rear wiper relay output. Body integrated unit output value. Set to ON when the rear wiper is activated. | ON/OFF | - |
| Shift lock solenoid output | ON/OFF status of the shift lock solenoid output. Body integrated unit output value. Solenoid is activated to set this item to ON when depressing the brake pedal with the shift lever in P range. | ON/OFF | - |
| Key lock solenoid output | ON/OFF status of the key lock solenoid output. Body integrated unit output value. Solenoid is activated to set this item to ON when the key is inserted with the shift lever in other than P range. | ON/OFF | Model without keyless access with push button start system |
| wiper deicer output | ON/OFF status of the wiper deicer output. Body integrated unit output value. Set to ON while the wiper deicer is operating. | ON/OFF | - |
| Keyless Buzzer Output | ON/OFF status of the keyless buzzer. Body integrated unit output value. Set to ON while the keyless buzzer is sounding. | ON/OFF | - |
| Horn Output | ON/OFF status of the security horn output. Body integrated unit output value. Set to ON while the horn is sounding due to a security breach. | ON/OFF | - |
| Room lamp output | Room light output ON/OFF status. Body integrated unit output value. Set to ON while the room light illuminates with the switch in DOOR position. | ON/OFF | - |
| key illumination lamp o/p | ON/OFF status of the key illumination light output. Body integrated unit output value. Set to ON while the key illumination light illuminates. | ON/OFF | Model without keyless access with push button start system |
| Immobilizer lamp output | ON/OFF status of the security indicator output. Body integrated unit output value. Set to ON while the security indicator in the combination meter illuminates. | ON/OFF | - |
| Small Light SW | ON/OFF status of the lighting 1 relay CAN output. CAN data sending value. Set to ON when the position light indicator in the combination meter illuminates. | ON/OFF | - |
| Headlamp | ON/OFF status of the lighting Lo relay CAN output. CAN data output value. Set to ON when the headlight Lo illuminates. | ON/OFF | - |
| High Beam | ON/OFF status of the lighting Hi relay CAN output. CAN data output value. Set to ON when the headlight Hi illuminates. | ON/OFF | - |
| Rr Defogger SW | Rear defogger switch ON/OFF status. Body integrated unit input value. Set to ON when the rear defogger switch is ON. | ON/OFF | - |
| Lane change signal setting | Presence or absence of the one-touch blinker control. Body integrated unit custom setting values. | Support/No Support | - |
| Rear wiper auto setting | Presence or absence of the rear wiper control linked with reverse shift. Body integrated unit custom setting values. | Support/No Support | - |
| Left turn signal input | ON/OFF status of the left turn signal switch. Body integrated unit input value. Set to ON while the left turn signal switch is ON. | ON/OFF | - |
| Right turn signal input | ON/OFF status of the right turn signal switch. Body integrated unit input value. Set to ON while the right turn signal switch is ON. | ON/OFF | - |
| Left turn signal output | ON/OFF status of the left turn signal light output. Body integrated unit output value. Set to ON while the left turn signal light illuminates. | ON/OFF | - |
| Right turn signal output | ON/OFF status of the right turn signal light output. Body integrated unit output value. Set to ON while the right turn signal light illuminates. | ON/OFF | - |
| Driver's Door Unlock Setting | Presence or absence of the driver's seat select unlock control. Body integrated unit custom setting values. | Select/ALL | Model with keyless access with push button start system |
| Rear Gate Unlock Setting | Presence or absence of the rear gate select unlock control. Body integrated unit custom setting values. | Select/ALL | Model with keyless access with push button start system |
| Daytime Running Light(DRL) Setting for North America | Body integrated unit custom setting values. | High Beam Dimming System/Alternate DRL System | - |
| Daytime Running Light(Alternate System) Output | DRL output ON/OFF status. Body integrated unit output value. Set to ON while the DRL illuminates. | ON/OFF | - |
| Wiper link Auto Light Setup | ON/OFF status of the wiper interlock auto light function control. Body integrated unit custom setting values. | ON/OFF | - |
| Steering Wheel | Body integrated unit custom setting values. | LHD/RHD | - |
| Vehicle Automatic Door Lock | OFF/Vehicle Speed/Select Lever P of the vehicle auto door lock control. Body integrated unit custom setting values. | OFF/Vehicle Speed/Select Lever P | - |
| Vehicle Automatic Door Unlock | OFF/Select Lever P/Power OFF/Driver Door Open of the vehicle auto door unlock control. Body integrated unit custom setting values. | OFF/Select Lever P/Power OFF/Driver Door Open | - |
| Steering Responsive Fog Lamp Setting | Presence/absence of SRF. Body integrated unit custom setting values. | SRF/None | - |
| Steering Responsive Fog Lamp OFF SW Input | ON/OFF status of SRF OFF switch. Body integrated unit input value. | ON/OFF | - |
| Steering Angle Sensor Signal | CAN data input value. | -3276.8 - 3276.8 deg | - |
| Steering Responsive Fog Lamp Mode | OFF/ON/Fail status of SRF. | ON/OFF/Fail | - |
| Steering Responsive Fog Lamp (Right) Output | ON/OFF status of SRF (R) ON output. | ON/OFF | - |
| Steering Responsive Fog Lamp (Left) Output | ON/OFF status of SRF (L) ON output. | ON/OFF | - |
| Steering Responsive Fog Lamp (Right) CAN Output | SRF (R) output status. CAN data output value. | ON/OFF | - |
| Steering Responsive Fog Lamp (Left) CAN Output | SRF (L) output status. CAN data output value. | ON/OFF | - |
| Steering Responsive Fog Lamp Indicator Signal | SRF indicator status. CAN data output value. | Turn_OFF/Turn_ON/BLINK | - |
| Hood Switch Close-side | ON/OFF status of the hood switch. Turns to ON when the hood is closed. | ON/OFF | - |
| Hood Switch Open-side | ON/OFF status of the hood switch. Turns to ON when the hood is open. | ON/OFF | - |
| Head Lamp Low Beam Specification | Headlight low beam light source type. Body integrated unit custom setting values. | Halogen/HID/LED | - |
| Head Lamp High Beam Specification | Headlight high beam light source type. Body integrated unit custom setting values. | Halogen/HID/LED | - |
| High Beam Assist Current Setting | Presence or absence of high beam assist. Body integrated unit custom setting values. | ON/OFF | - |
| High Beam Assist Failure Indicator | Set to ON when high beam assist fails. CAN data output value. | OFF/ON | - |
| High Beam Assist Failure Message | Sends display status of high beam assist related words. CAN data output value. | No message/HALT/Fail | - |
| High Beam Assist Indicator (Active/Blink) | Set to ON when high beam assist is activated. CAN data output value. | OFF/ON/Blink | - |
| High Beam Assist Function Setting (mirror/EyeSight) | Presence or absence of high beam assist. Body integrated unit custom setting values. | No HBA/mirror HBA/EyeSight HBA | - |
| Vehicle Automatic Door Lock/Unlock and Impact Detection Door Lock Setting | Presence of vehicle auto door lock control/vehicle auto door unlock control/collision detection door unlock control. Body integrated unit custom setting values. | Support/No Support | - |
| P/W Relay Output | ON/OFF status of rear seat P/W power supply relay. ON when IGN is ON except for remote start. | ON/OFF | - |
| Lighting I Switch Input | ON/OFF status of the lighting 1 switch. Body integrated unit input value. Set to ON while the lighting 1 switch is ON. | ON/OFF | - |
| Lighting II Switch Input | ON/OFF status of the lighting 2 switch. Body integrated unit input value. Set to ON while the lighting 2 switch is ON. | ON/OFF | - |
| Lighting AUTO input | ON/OFF status of the lighting AUTO switch. Body integrated unit input value. Set to ON while the lighting AUTO switch is ON. | ON/OFF | Except for C5 model |
| Lighting OFF Switch Input | ON/OFF status of the lighting OFF switch. Body integrated unit input value. Set to ON while the lighting OFF switch is ON. | ON/OFF | C5 model |
| Dimmer Hi Switch Input | Lighting Hi switch ON/OFF status. Body integrated unit input value. Set to ON while the lighting Hi switch is ON. | ON/OFF | - |
| Dimmer Passing Switch Input | ON/OFF status of the dimmer Pass switch. Body integrated unit input value. Set to ON while the dimmer Pass switch is ON. | ON/OFF | - |
| Illumination sensor flag | Presence or absence of the illumination sensor. Body integrated unit internal data. | Support/Not Exist | - |
| Lighting I Lamp Output | ON/OFF status of the lighting 1 relay output. Body integrated unit output value. Set to ON while the position light illuminates. | ON/OFF | - |
| Lighting II Lamp Output | ON/OFF status of the lighting Lo relay output. Body integrated unit output value. Set to ON while the lighting Lo illuminates. | ON/OFF | - |
| Lighting Hi Light Output | ON/OFF status of the lighting Hi relay output. Body integrated unit output value. Set to ON while the lighting Hi illuminates. | ON/OFF | - |
| Front Fog Lamp Output | ON/OFF status of the front fog light relay output. Body integrated unit output value. Set to ON while the front fog light illuminates. | ON/OFF | - |
| Power Supply Transistor | ON/OFF status of the lighting power supply relay output. Body integrated unit output value. Set to ON while the light illuminates with the key removed or while the key is inserted (including ACC and IGN ON). | ON/OFF | - |
| Map lamp output | ON/OFF status of the map light output. Body integrated unit output value. Set to ON while the map light illuminates with the switch in DOOR position. | ON/OFF | - |
| Luggage/Trunk lamp output | ON/OFF status of the luggage/trunk light output. Body integrated unit output value. Set to ON while the luggage/trunk light illuminates with the switch in DOOR position. | ON/OFF | - |
| Front washer switch input | Set to ON when the front wiper washer switch is ON. Body integrated unit input value. | ON/OFF | - |
| Rr Defogger op. mode | Status of the rear defogger operation mode. Body integrated unit custom setting values. | Continuous/Normal | - |
| Security Alarm Setup | Alarm ON/OFF status when the security system is activated. Body integrated unit custom setting values. | ON/OFF | - |
| Impact Sensor Setup | ON/OFF status of impact sensor. Body integrated unit custom setting values. | ON/OFF | - |
| Alarm delay setup | ON/OFF status of the alarm monitoring delay function. Body integrated unit custom setting values. | ON/OFF | - |
| Lockout prevention | ON/OFF status of the key lockout prevention function. Body integrated unit custom setting values. | ON/OFF | - |
| Impact sensor | Presence or absence of the impact sensor. Body integrated unit custom setting values. | Support/No Support | - |
| Buzzer sounding setting | ON/OFF status of the answer-back buzzer sounding. Body integrated unit custom setting values. | ON/OFF | - |
| Abnormal warning lamp flashing setting | ON/OFF status of the hazard answerback. Body integrated unit custom setting values. | ON/OFF | - |
| Door open warning | Presence or absence of the door open warning function. Body integrated unit custom setting values. | Support/No Support | - |
| Dome Light Alarm Setting | ON/OFF status of the room light illumination when the alarm is activated. Body integrated unit custom setting values. | ON/OFF | - |
| Auto A/C ECU Setting | Presence or absence of the A/C ECM. Body integrated unit custom setting values. | Support/No Support | - |
| wiperdeicer | Presence or absence of the wiper deicer. Body integrated unit custom setting values. | Support/Not Exist | - |
| Sedan/Wagon Setting | Vehicle type, Sedan/Wagon (OBK). Body integrated unit custom setting values. | Sedan/Wagon | - |
| MT/AT Setting | Transmission type, MT/AT (CVT). Body integrated unit custom setting values. | MT/AT | - |
| Destination Setting | Vehicle destination information. Body integrated unit internal data. | JPN KA, KC KS EU LHD Other than KS Canada (C0, C5) U.S. (U4, U5, U6) EK, ER | - |
| Seat Memory Setting | Presence or absence of the seat memory. Body integrated unit custom setting values. | Support/No Support | - |
| Illumination Sensor Setting | Presence or absence of the illumination sensor. Body integrated unit custom setting values. | Support/No Support | - |
| Factory initial setting | Factory/Market mode status. Body integrated unit custom setting values. | Market/Factory | - |
| EPB setting | Presence or absence of EPB. Body integrated unit custom setting values. | Support/No Support | - |
| Sunroof setting | Presence or absence of sunroof. Body integrated unit custom setting values. | Support/No Support | - |
| Welcome Light Off Delay Time(Exiting) | Time setting to turn off the light for the welcome lighting (exiting) function. Body integrated unit custom setting values. | OFF 30 Sec 60 Sec 90 Sec | - |
| Welcome Light Off Delay Time(Approaching) | Time setting to turn off the light for the welcome lighting (approaching) function. Body integrated unit custom setting values. | OFF 30 Sec 60 Sec 90 Sec | - |
| Keyless Buzzer Volume | Volume of the keyless buzzer. Body integrated unit custom setting values. | 1 - 7 | - |
| Hazard switch Input | ON/OFF status of the turn hazard switch input. Body integrated unit input value. Set to ON when the turn hazard switch is ON. | ON/OFF | - |
| Towing switch input | Towing switch ON/OFF status. Body integrated unit input value. Set to ON when the towing switch is ON. | ON/OFF | - |
| Auto Dimmer Cancel setting | Sensitivity of auto dimmer cancel function. Body integrated unit custom setting values. | 0 (OFF) Least Less Normal More Most | - |
| Alarm Operation History | History of alarm operation. | None ALARM by opening any of the door ALARM by opening the trunk lib ALARM by shock sensor ALARM by ultrasonic sensor WARNING by shock sensor WARNING by ultrasonic sensor ALARM by opening the hood | - |
| IGN time (Alarm) | Time stamp information at alarm operation. | 0 to 65535 Time | - |
| Immobilizer Set Memory | Remote immobilizer status. | Set/Unset | Model without keyless access with push button start system Except for C5 model |
| Trunk Request SW Input | ON/OFF status of the trunk opener switch. Body integrated unit input value. Set to ON when the trunk opener switch is pressed. | ON/OFF | Model without keyless access with push button start system |
| Trunk Request SW Setup | ON/OFF status of the trunk opener switch-operated trunk open function. Body integrated unit custom setting values. | ON/OFF | Model without keyless access with push button start system |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.