2016 Subaru WRX BaseFACTORY OEM SERVICE PROCEDURE

Drive Cycle O

DTC Item Condition
P0441 Evap System (CPC) Incorrect Purge Flow -

Diagnostic procedure:Β 

WARNING: When performing drive cycle O on a public road, pay sufficient attention to the traffic condition and give the highest priority to safe driving.
  1. Drive according to the drive pattern described below.
    Fig 1: Driving Pattern (Drive Cycle O)
    G10292563Courtesy of SUBARU OF AMERICA, INC.
  2. Park the vehicle on a safe place.
    NOTE: Driving method while vehicle is driven to a stop at safe place is not restricted.
  3. With the vehicle idling, read the temporary diagnostic code of DTC using Subaru Select Monitor or general scan tool.
    NOTE:
    • For detailed operation procedures, refer to "Read Diagnostic Trouble Code (DTC)". < Ref. to READ DIAGNOSTIC TROUBLE CODE (DTC)Β . >
    • In the step Β 3), if the DTC is not displayed on the Subaru Select Monitor or general scan tool display screen, the trouble is resolved.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.