SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUBARU2016LEGACY 2.5IREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT VARIANT/TRIMSECTION 2 (ENGINE MECHANICAL (H6DO))GENERAL DESCRIPTIONPREPARATION TOOLSPECIAL TOOL
2016 Subaru Legacy 2.5i

Special Tool

2016 Subaru Legacy 2.5iSECTION Special Tool
WARNING: This page is about a different variant/trim than selected.
ILLUSTRATION TOOL NUMBER DESCRIPTION REMARKS
  18250AA010 CYLINDER HEAD TABLE
  • Used for replacing valve guides.
  • Used for removing and installing valve spring.
  18232AA000 ENGINE STAND Used for disassembling and assembling engine.
  398744300 PISTON GUIDE Used for installing piston in cylinder.
  18261AA010 VALVE OIL SEAL GUIDE Used for press-fitting of intake valve guide oil seals and exhaust valve guide oil seals.
  18350AA000 CONNECTING ROD BUSHING REMOVER AND INSTALLER Used for removing and installing connecting rod bushing.
  499977500 CAM SPROCKET WRENCH Used for removing and installing cam sprocket.
  499587200 CRANKSHAFT OIL SEAL INSTALLER
  • Used for installing crankshaft oil seal.
  • Used together with CRANKSHAFT OIL SEAL GUIDE (499597100).
  499597100 CRANKSHAFT OIL SEAL GUIDE
  • Used for installing crankshaft oil seal.
  • Used together with CRANKSHAFT OIL SEAL INSTALLER (499587200).
  499718000 VALVE SPRING REMOVER Used for removing and installing valve spring.
  499765700 VALVE GUIDE REMOVER Used for removing valve guides.
  499765900 VALVE GUIDE REAMER Used for reaming valve guides.
  18252AA000 CRANKSHAFT SOCKET Used for rotating crankshaft.
  498277200 STOPPER SET Used for preventing the torque converter from falling when removing and installing the engine.
  499585700 OIL SEAL GUIDE Used for installing the chain cover oil seal.
  18251AA050 VALVE GUIDE ADJUSTER Used for installing intake valve guides.
  18251AA060 VALVE GUIDE ADJUSTER Used for installing exhaust valve guides.
  18355AA000 PULLEY WRENCH
  • Used for removing and installing the crank pulley.
  • Used for removing and installing the idler sprocket.
  • Used together with PULLEY WRENCH PIN SET (18334AA000).
  18334AA000 PULLEY WRENCH PIN SET
  • Used for removing and installing the crank pulley.
  • Used for removing and installing the idler sprocket.
  • Used together with PULLEY WRENCH (18355AA000).
  42099AE000 QUICK CONNECTOR RELEASE Used for disconnecting the quick connector of the fuel delivery tube and FUEL HOSE (42075AG690).
NOTE: FUEL HOSE (42075AG690) is used for checking the fuel pressure.
  18471AA000 FUEL PIPE ADAPTER Used for inspecting the fuel pressure.
  42075AG690 FUEL HOSE Used for inspecting the fuel pressure.
NOTE: This is the SUBARU genuine part.
  18360AA020 HANGER Used for removing and installing engine.
  -
(Newly adopted tool)		 SUBARU SELECT MONITOR 4 Used for setting of each function and troubleshooting for electrical system.
NOTE: For detailed operation procedures of Subaru Select Monitor 4, refer to "Application help".
Fig 1: ST18250AA010
G05018634Courtesy of SUBARU OF AMERICA, INC.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.