SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUBARU2016LEGACY 2.5IREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT VARIANT/TRIMSECTION 2 (ENGINE MECHANICAL (H6DO))CAM SPROCKETINSTALLATION
2016 Subaru Legacy 2.5i

Cam Sprocket: Installation

2016 Subaru Legacy 2.5iSECTION Installation
WARNING: This page is about a different variant/trim than selected.
  1. Install the cam sprocket.
  2. Use the ST to lock the cam sprocket, and install the cam sprocket bolt.

    Tightening torque: 

    Tighten to a torque of 29.5 N.m (3.0 kgf-m, 21.8 ft-lb), and then tighten further by 45°. 

    ST 499977500 CAM SPROCKET WRENCH

    • IN side
      Fig 1: Installing Cam Sprocket Bolt - IN Side
      G05667843Courtesy of SUBARU OF AMERICA, INC.
    • EX side
      Fig 2: Installing Cam Sprocket Bolt - EX Side
      G05667844Courtesy of SUBARU OF AMERICA, INC.
  3. Install the timing chain assembly. < Ref. to INSTALLATION , Timing Chain Assembly. >
  4. Install the chain cover. < Ref. to INSTALLATION , Chain Cover. >
  5. Install the crank pulley. < Ref. to INSTALLATION , Crank Pulley. >
  6. Install the V-belts. < Ref. to INSTALLATION , V-belt. >
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.