Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSSUBARU2016LEGACY 2.5IREPAIR AND DIAGNOSISENGINE MECHANICALEXHAUST SYSTEM (H4DO)CENTER EXHAUST PIPEREMOVAL

2016 Subaru Legacy 2.5i

Center Exhaust Pipe: Removal

2016 Subaru Legacy 2.5iSECTION Removal

Lift up the vehicle.
Remove the bolts, springs, and nuts securing the rear exhaust pipe to the center exhaust pipe.

Fig 1: Locating Rear Exhaust Pipe Bolts
Courtesy of SUBARU OF AMERICA, INC.
Remove the bolt which holds center exhaust pipe to hanger bracket.

Fig 2: Locating Center Exhaust Pipe Bolt
Courtesy of SUBARU OF AMERICA, INC.
Remove the center exhaust pipe from the front exhaust pipe.

Fig 3: Locating Front Exhaust Pipe Bolts
Courtesy of SUBARU OF AMERICA, INC.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.