Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Keyless Access System Check: Operation
2016 Subaru Legacy 2.5iSECTION Operation
- On «Start» display, select «Diagnosis».
- On «Vehicle selection» display, input the target vehicle information and select «Confirmed».
- On «Main Menu» display, select «Each System».
- On «Select System» display, select «Keyless Access with Push Button Start» and then select «Enter».
- On «Select Function» display, select «Work Support».
- On «Work Support» display, select «Keyless access system check».
- Select a transmitter to be checked.
- Select [Exit] to exit the system check. The screen will return to the «Keyless access system check» screen.
| Data | Customize setting | Remarks |
|---|---|---|
| Keyless access system check | Driver side external transmitter - internal tuner | When the setting content on the left is selected, the access key is neared to the selected transmitter (access antenna) and collation matches, the buzzer will sound. |
| Passenger side external transmitter - internal tuner | ||
| Fr internal transmitter - internal tuner | ||
| Rr internal transmitter - internal tuner | ||
| Trunk-internal transmitter - trunk-internal tuner | ||
| Trunk-external transmitter - trunk-internal tuner | ||
| R gate internal transmitter - internal tuner | ||
| R gate external transmitter - internal tuner | ||
| Immobilizer amplifier transmission | ||
| Collation result history Clear | Execution | |
| - |
NOTE:
For detailed operation procedures, refer to "Application help".
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.