SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUBARU2016LEGACY 2.5IREPAIR AND DIAGNOSISACCESSORIES & EQUIPMENTINFOTAINMENTENTERTAINMENT SYSTEMAUDIO SYSTEMOPERATIONINITIALIZATION (FACTORY DEFAULT)
2016 Subaru Legacy 2.5i

Initialization (Factory Default)

2016 Subaru Legacy 2.5iSECTION Initialization (Factory Default)

Model with 6.2 inch display 

  1. Turn the ignition switch to ACC.
  2. Press the HOME button (a) to display the {HOME} screen.
  3. Touch the {SETTINGS} (b) to display the {SETTINGS} screen.
  4. Touch the {Settings General} (c) to display the {Settings General} screen.
  5. Touch the {Restore} (d) in {Reset to Factory Settings}.
    Fig 1: Screen Display - Reset To Factory Settings
    G10309118Courtesy of SUBARU OF AMERICA, INC.
  6. Touch {OK} after {Are you sure you want to delete All Data?} is displayed.
  7. {DO NOT OPERATE. Initializing now.} is displayed, and all data deletion is initiated.
  8. When all data is deleted, {All date has been deleted. Start up the engine to reboot.} is displayed.

    Model with 7 inch display 

    Operation is the same as that of navigation assembly, therefore, refer to "Navigation System". < Ref. to INITIALIZATION (FACTORY DEFAULT) , OPERATION, Navigation System. >

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.