Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUBARU2016LEGACY 2.5IREPAIR AND DIAGNOSISACCESSORIES & EQUIPMENTINFOTAINMENTENTERTAINMENT SYSTEMANTENNAREPAIR
2016 Subaru Legacy 2.5i
Entertainment System: Antenna: Repair
2016 Subaru Legacy 2.5iSECTION Repair
- Clean the external circumference of antenna wire and around with alcohol or appropriate cleaning solvent.
- Paste a thin masking film on the glass along broken wire.
- Apply the conductive silver composition on the broken portion with a drawing pen.
Conductive silver composition:
DUPONT No. 4817 or equivalent
- Dry out the deposited portion.
- After repair has been completed, measure the resistance in repaired wire and check that it is normal.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.