Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DBβ LIVE
HOMESERVICE MANUALSSUBARU2016LEGACY 2.5IREPAIR AND DIAGNOSISACCESSORIES & EQUIPMENTEXTERIOR LIGHTSLIGHTING SYSTEM (SERVICE INFORMATION)GENERAL DESCRIPTIONSPECIFICATION
2016 Subaru Legacy 2.5i
Lighting System (Service Information): General Description: Specification
2016 Subaru Legacy 2.5iSECTION Specification
- Sedan model
No. Description Capacity and wattage Type (1) Headlight Low beam (halogen type) 12 V - 55 W H11 Low beam (HID type) 12 V - 35 W D4S High beam 12 V - 60 W HB3 Front turn signal light 12 V - 21 W WY21W Parking light 12 V - 1.2 W (LED) (1) Side marker light 12 V - 5 W W5W (2) Front fog light Model without SRF 12 V - 19 W H16 Model with SRF 12 V - 55 W H11 (3) Glove box light 12 V - 1.4 W (LED) (1) (4) Pocket light 12 V - 1.4 W (LED) (1) (5) Vanity mirror light 14 V - 1.4 W - (6) Spot map light 12 V - 8 W - (7) Room light 12 V - 8 W - (8) Side turn signal light 12 V - 1.1 W (LED) (1) (9) Door step light 12 V - 5 W W5W (10) Door pocket light 12 V - 1.4 W (LED) (1) (11) High-mounted stop light 12 V - 0.8 W (LED) (1) (12) Trunk room light 12 V - 3.8 W SAE#194 (13) Rear combination light Tail & stop light 12 V - 0.4/4.7 W (LED) (1) Turn signal light 12 V - 21 W WY21W Side marker light 12 V - 5 W W5W (14) Rear finisher light Back-up light 12 V - 16 W W16W (15) License plate light 12 V - 5 W W5W (1) Non-disassembly type - OUTBACK model
No. Description Capacity and wattage Type (1) Headlight Low beam (halogen type) 12 V - 55 W H11 Low beam (HID type) 12 V - 35 W D4S High beam 12 V - 60 W HB3 Front turn signal light 12 V - 21 W WY21W Parking light 12 V - 1.2 W (LED) (1) Side marker light 12 V - 5 W W5W (2) Front fog light Model without SRF 12 V - 55 W H11 Model with SRF 12 V - 55 W H11 (3) Glove box light 12 V - 1.4 W (LED) (1) (4) Pocket light 12 V - 1.4 W (LED) (1) (5) Vanity mirror light 14 V - 1.4 W - (6) Spot map light 12 V - 8 W - (7) Room light 12 V - 8 W - (8) Side turn signal light 12 V - 1.1 W (LED) (1) (9) Door step light 12 V - 5 W W5W (10) Door pocket light 12 V - 1.4 W (LED) (1) (11) High-mounted stop light 12 V - 1.1 W (LED) (1) (12) Luggage room light 12 V - 13 W SAE#912 (13) Rear combination light Tail & stop light 12 V - 0.4/4.7 W (LED) (1) Turn signal light 12 V - 21 W WY21W Side marker light 12 V - 5 W W5W (14) Rear finisher light Back-up light 12 V - 16 W W16W (15) License plate light 12 V - 5 W W5W (1) Non-disassembly type
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.