Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSSUBARU2014OUTBACK 2.5I, STANDARD TRANSREPAIR AND DIAGNOSISBODY & FRAMESEATSSEAT SYSTEM - SEATSREAR SEATDISASSEMBLY

2014 Subaru Outback 2.5i, Standard Trans

Rear Seat: Disassembly

2014 Subaru Outback 2.5i, Standard TransSECTION Disassembly

Remove the rear seat.
- Sedan model: < Ref. to SEDAN MODEL , REMOVAL, Rear Seat. >
- OUTBACK model < Ref. to OUTBACK MODEL , REMOVAL, Rear Seat. >
Remove the headrest.
Remove the backrest back board.
1. Remove the plastic fastener at the lower part of backrest assembly, and open the fastener at both side to turn over the backrest cover.
2. Remove the backrest striker cover. (Sedan model)
3. Remove the screws (A) and clips (B).
4. Remove the hog rings (C) and remove the backrest backboard.
  
  Fig 1: Locating Hog Rings, Screws And Clips
  Courtesy of SUBARU OF AMERICA, INC.
Remove the headrest bushing.

Fig 2: Locating Headrest Bushing Tips
Courtesy of SUBARU OF AMERICA, INC.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.