Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUBARU2014OUTBACK 2.5I, STANDARD TRANSREPAIR AND DIAGNOSISACCESSORIES & EQUIPMENTCOMMUNICATION DEVICESLAN COMMUNICATION SYSTEM (DIAGNOSTICS)LIST OF DIAGNOSTIC TROUBLE CODE (DTC)LISTNOTES
2014 Subaru Outback 2.5i, Standard Trans
List of Diagnostic Trouble Code (DTC): List: Notes
2014 Subaru Outback 2.5i, Standard TransSECTION Notes
| DTC | Item | Content of diagnosis | Note |
|---|---|---|---|
| None | Communication for Initializing Impossible | Subaru Select Monitor communication is open or shorted. | Refer to COMMUNICATION FOR INITIALIZING IMPOSSIBLE . |
| U1201 | CAN-HS Counter Abnormal | High speed CAN communication error | Refer to DTC U1201 CAN-HS COUNTER ABNORMAL . |
| U1202 | CAN-HS Bus Off | Communication of some module is shut down. | Refer to DTC U1202 CAN-HS BUS OFF . |
| U1211 | CAN-HS ECM Data Abnormal | Error data is received from ECM. | Refer to DTC U1211 CAN-HS ECM DATA ABNORMAL . |
| U1212 | CAN-HS TCM Data Abnormal | Error data is received from TCM. | Refer to DTC U1212 CAN-HS TCM DATA ABNORMAL . |
| U1213 | CAN-HS VDC Data Abnormal | Error data is received from VDC module. | Refer to DTC U1213 CAN-HS VDC DATA ABNORMAL . |
| U121A | CAN-HS Meter Unit Data Abnormal | Error data is received from meter. | Refer to DTC U121A CAN-HS METER UNIT DATA ABNORMAL . |
| U121B | CAN-HS A/C Data Abnormal | Error data is received from A/C module. | Refer to DTC U121B CAN-HS A/C DATA ABNORMAL . |
| U121C | CAN-HS SCU Data Abnormal | Error data is received from SCU. | Refer to DTC U121C CAN-HS SCU DATA ABNORMAL . |
| U1219 | CAN-HS EPB Data Abnormal | Error data is received from EPB module. | Refer to DTC U1219 CAN-HS EPB DATA ABNORMAL . |
| U1221 | CAN-HS ECM No-Receive Data | Data does not arrive from ECM. | Refer to DTC U1221 CAN-HS ECM NO-RECEIVE DATA . |
| U1222 | CAN-HS TCM No-Receive Data | Data does not arrive from TCM. | Refer to DTC U1222 CAN-HS TCM NO-RECEIVE DATA . |
| U1223 | CAN-HS VDC No-Receive Data | Data does not arrive from VDC module. | Refer to DTC U1223 CAN-HS VDC NO-RECEIVE DATA . |
| U122A | CAN-HS Meter No-Receive Data | Data does not arrive from meter. | Refer to DTC U122A CAN-HS METER NO-RECEIVE DATA . |
| U122B | CAN-HS A/C No-Receive Data | Data does not arrive from A/C CM. | Refer to DTC U122B CAN-HS A/C NO-RECEIVE DATA . |
| U122C | CAN-HS SCU No-Receive Data | Data does not arrive from SCU. | Refer to DTC U122C CAN-HS SCU NO-RECEIVE DATA . |
| U1229 | CAN-HS EPB No-Receive Data | Data does not arrive from EPB module. | Refer to DTC U1229 CAN-HS EPB NO-RECEIVE DATA . |
| U1301 | CAN-LS Counter Abnormal (LS or KAC) | Communication is unstable because of KAC CAN communication error. | Refer to DTC U1301 CAN-LS COUNTER ABNORMAL . |
| U1302 | CAN-LS Bus Off (LS or KAC) | Integrated unit communication is shut down because of KAC CAN communication error. | Refer to DTC U1302 CAN-LS BUS OFF . |
| U1328 | Smart System CAN (KAC) Data No-Receive | Data does not arrive from keyless access CM. | Refer to DTC U1328 SMART SYSTEM CAN (KAC) DATA NO-RECEIVE . |
| U1601 | LIN Communication (Seat Memory) Failure | Communication error with seat memory module occurred. | Refer to DTC U1601 LIN COMMUNICATION (SEAT MEMORY) FAILURE . |
| U0073 | Control Module Communication Bus "A" Off | Communication of some module is shut down. | Refer to DTC U0073 CONTROL MODULE COMMUNICATION BUS "A" OFF . |
| U0401 | Invalid Data Received From ECM/PCM "A" | Error data is received from ECM. | Refer to DTC U0401 INVALID DATA RECEIVED FROM ECM/PCM "A" . |
| U0402 | Invalid Data Received From TCM | Error data is received from TCM. | Refer to DTC U0402 INVALID DATA RECEIVED FROM TCM . |
| U0416 | Invalid Data Received From Vehicle Dynamics Control Module | Error data is received from VDC module. | Refer to DTC U0416 INVALID DATA RECEIVED FROM VEHICLE DYNAMICS CONTROL MODULE . |
| U0422 | Invalid Data Received From Body Control Module | Error data is received from body integrated unit. | Refer to DTC U0422 INVALID DATA RECEIVED FROM BODY CONTROL MODULE . |
| U0423 | Invalid Data Received From Instrument Panel Cluster Control Module | Error data is received from meter. | Refer to DTC U0423 INVALID DATA RECEIVED FROM INSTRUMENT PANEL CLUSTER CONTROL MODULE . |
| U1433 | Invalid Data Received From EyeSight | Error data is received from stereo camera. | Refer to DTC U1433 INVALID DATA RECEIVED FROM EYESIGHT . |
| U0417 | Invalid Data Received From Park Brake Control Module | Error data is received from electric parking CM. | Refer to DTC U0417 INVALID DATA RECEIVED FROM PARK BRAKE CONTROL MODULE . |
| U0100 | Lost Communication With ECM/PCM "A" | Data does not arrive from ECM. | Refer to DTC U0100 LOST COMMUNICATION WITH ECM/PCM "A" . |
| U0101 | Lost Communication With TCM | Data does not arrive from TCM. | Refer to DTC U0101 LOST COMMUNICATION WITH TCM . |
| U0122 | Lost Communication With Vehicle Dynamics Control Module | Data does not arrive from VDC module. | Refer to DTC U0122 LOST COMMUNICATION WITH VEHICLE DYNAMICS CONTROL MODULE . |
| U0140 | Lost Communication With Body Control Module | Data does not arrive from body integrated unit. | Refer to DTC U0140 LOST COMMUNICATION WITH BODY CONTROL MODULE . |
| U0155 | Lost Communication With Instrument Panel Cluster (IPC) Control Module | Data does not arrive from meter. | Refer to DTC U0155 LOST COMMUNICATION WITH INSTRUMENT PANEL CLUSTER (IPC) CONTROL MODULE . |
| U1235 | Lost Communication With EyeSight | Data does not arrive from stereo camera. | Refer to DTC U1235 LOST COMMUNICATION WITH EYESIGHT . |
| U0128 | Lost Communication With Park Brake Control Module | Data does not arrive from electric parking. | Refer to DTC U0128 LOST COMMUNICATION WITH PARK BRAKE CONTROL MODULE . |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.