Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUBARU2014LEGACY 2.5I, AUTOMATIC CVT TRANSREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 5 (GLASS/WINDOW/MIRRORS)POWER WINDOW SYSTEMOPERATIONRESET OPERATION A
2014 Subaru Legacy 2.5i, Automatic CVT Trans
Reset Operation A
2014 Subaru Legacy 2.5i, Automatic CVT TransSECTION Reset Operation A
WARNING: This page is about a different car, the 2014 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
- Sit in the driver's seat and close the door.
- Turn the ignition switch to ON.
- Operate the switch - power window main to open the glass assembly - front door halfway.
- Operate the switch - power window main in "UP" direction to fully close the glass assembly - front door on the driver's side.
- While the glass assembly - front door is fully closed, hold down the switch - power window main in "UP" direction for one second.
- Operate the switch - power window main in "AUTO DOWN" direction to check whether the window fully opens properly.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.