Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUBARU2014IMPREZA SPORT LIMITEDREPAIR AND DIAGNOSISMAINTENANCEPROCEDURESGENERAL INFORMATIONENGINE COOLANTINSPECTION
2014 Subaru Impreza Sport Limited
Engine Coolant: Inspection
2014 Subaru Impreza Sport LimitedSECTION Inspection
CAUTION:
- Do not use water instead of coolant.
- Refer to "RM" section for the recommended engine coolant. < Ref. to ENGINE COOLANT , RECOMMENDED MATERIALS, Recommended Materials.>
- Park the vehicle on a level surface.
- Make sure the engine coolant level in the reservoir tank is between "FULL" and "LOW" when the engine is cold.NOTE: If the engine coolant level drops, make sure that there are no engine coolant leakage, and add engine coolant to the "FULL" line.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.