Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Diagnostic Method
- Abnormality Judgment 1
Judge as NG when the following conditions are established.
| Malfunction Criteria | Threshold Value |
|---|---|
| Data update from HPCM MAIN-CAN | None |
Time Needed for Diagnosis: 564 ms
- Abnormality Judgment 2
Judge as NG when the following conditions are established.
| Malfunction Criteria | Threshold Value |
|---|---|
| Data from HPCM MAIN-CAN | Parity error |
Time Needed for Diagnosis: 64 ms
Malfunction Indicator Light Illumination: Illuminates as soon as a malfunction occurs.
- Normality Judgment
Judge as OK and clear the NG if the continuous time while the following conditions are established is more than the predetermined time.
| Malfunction Criteria | Threshold Value |
|---|---|
| Data update from HPCM MAIN-CAN | Yes |
| Data from HPCM MAIN-CAN | No error |
Time Needed for Diagnosis: 1000 ms
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.