Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUBARU2014IMPREZA SPORT LIMITEDREPAIR AND DIAGNOSISACCESSORIES & EQUIPMENTCOMMUNICATION DEVICESBODY CONTROL SYSTEM (DIAGNOSTICS)REGISTRATION BODY INTEGRATED UNITOPERATIONCONFIRM CURRENT SETTING
2014 Subaru Impreza Sport Limited
Confirm Current Setting
2014 Subaru Impreza Sport LimitedSECTION Confirm Current Setting
- On «Main Menu» display, select {Others}.
- On «Others» display, select {Customized Setting}.
- Save the setting.
Required items for new registration. (Except for system not equipped)
| Item | Item to confirm | Remarks | |||
|---|---|---|---|---|---|
| number of regist. | 1 | 2 | 3 | 4 | Number of registered ID |
| Off delay time | OFF | 10 Sec | 20 Sec | 30s | Setting for lighting off time |
| Auto Light Sensitivity Adjustment | Dull | Normal (Standard) | Sensitive | Very sensitive | 1st (slow) - 4th (fairly quick) |
| Power rear gate setting | ON | OFF | N/A | ||
| Back auto rear wiper setting | ON | OFF | N/A | ||
| TPMS Setting | TPMS | No TPMS | |||
| Driver's door select unlock | ALL | Select | N/A | ||
| R gate select unlock | ALL | Select | N/A | ||
| Rear defogger operation mode | Normal | Continuous | |||
| Security Alarm Setup | ON | OFF | |||
| Impact Sensor Setup | ON | OFF | Option setting | ||
| Alarm delay setup | ON | OFF | |||
| Lockout prevention | ON | OFF | |||
| Impact sensor | ON | OFF | Option setting | ||
| Buzzer sounding setting | ON | OFF | |||
| Abnormal warning lamp flashing setting | ON | OFF | |||
| Passive Alarm | ON | OFF | |||
| Door open warning | ON | OFF | |||
| Dome Light Alarm Setting | ON | OFF | |||
| Auto A/C ECU Setting | ON | OFF | |||
| wiperdeicer | ON | OFF | Option setting | ||
| Illumination Control On/Off | ON | OFF | |||
| Sedan/Wagon Setting | Wagon | Sedan | |||
| MT/AT Setting | MT | AT | |||
| 6MT Setting | 6MT | Other than 6MT | |||
| Illumination Sensor Setting | ON | OFF | |||
| Factory initial setting | Factory | Market | Do not change to factory mode. | ||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.