Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUBARU2014IMPREZA SPORT LIMITEDREPAIR AND DIAGNOSISACCESSORIES & EQUIPMENTCOMMUNICATION DEVICESBODY CONTROL SYSTEM (DIAGNOSTICS)READ CURRENT DATALIST
2014 Subaru Impreza Sport Limited
Read Current Data: List
2014 Subaru Impreza Sport LimitedSECTION List
| Items to be displayed | Unit of measure | Remarks | Note |
|---|---|---|---|
| BATT voltage (control) | 10 - 15 V | Body integrated unit input value | Always |
| BATT voltage (BACKUP) | 10 - 15 V | Body integrated unit input value | Always |
| IG power supply voltage | 10 - 15 V | Body integrated unit input value | Ignition switch ON |
| ACC voltage | 10 - 15 V | Body integrated unit input value | Ignition switch ACC |
| Illumination VR Voltage | 0 - 5 V | Body integrated unit input value | Input value from illumination volume |
| Illumi. output d-ratio | 0 - 100% | Body integrated unit output value | Small light ON Illumination volume is other than bright. |
| number of regist. | 0 - 4 | Number of keyless key registered | |
| Front Wheel Speed | km/h | CAN data input value | Reception from VDC module |
| Fuel consumption | cc/s | CAN data input value | Reception from ECM |
| Coolant Temperature | -40 - 215°C | CAN data input value | Reception from ECM |
| Shift Position | 1 - 3, D - S, D, N, R, P | CAN data input value | Reception from TCM |
| Buzzer beeping request | Status for 'beeping deactivated' Reverse warning Key warning buzzer Light Remained Buzzer Customize 1 Customize 2 Registration completed 1 Registration completed 2 registered Registration NG |
CAN data output value | Reception from body integrated unit |
| Destination | JPN U4, U5, U6 C0 EC, EA, E2, EL K4, C4, C6 KS EK ER, EN KA, KC EH C6 |
CAN data input value | - |
| Illumination Sensor Output | 0 - 5 V | CAN data input value | - |
| Off delay time | OFF 10 Sec 20 Sec 30s |
Body integrated unit setting value | Customize setting |
| Auto Light Sensitivity Adjustment | Dull Normal Sensitive Very sensitive |
Body integrated unit setting value | Customize setting |
| key-lock warning SW | ON/OFF | Body integrated unit input value | ON when ignition key inserted |
| Stop light SW | ON/OFF | Body integrated unit input value | ON when brake pedal is depressed |
| Front fog lamp SW input | ON/OFF | Body integrated unit input value | When front fog light switch is ON |
| Driver's door SW input | ON/OFF | Body integrated unit input value | ON when driver's door is open |
| P-door SW input | ON/OFF | Body integrated unit input value | ON when passenger's door is open |
| Rear right door SW input | ON/OFF | Body integrated unit input value | ON when rear right door is open |
| Rear left door SW input | ON/OFF | Body integrated unit input value | ON when rear left door is open |
| R Gate SW input | ON/OFF | Body integrated unit input value | ON when rear gate/trunk is open |
| Manual lock SW input | ON/OFF | Body integrated unit input value | Manual lock switch ON |
| Manual unlock SW input | ON/OFF | Body integrated unit input value | Manual unlock switch ON |
| Bright SW input | ON/OFF | Body integrated unit input value | Bright switch ON |
| P SW | ON/OFF | Body integrated unit input value | ON when shift range is in parking Shift lever P switch signal |
| MT Reverse Switch | ON/OFF | Body integrated unit input value | Reverse switch ON (for MT vehicle only) |
| R wiper ON SW input | ON/OFF | Body integrated unit input value | Rear wiper switch ON |
| R wiper INT SW input | ON/OFF | Body integrated unit input value | Rear wiper switch (INT ON) |
| R washer SW input | ON/OFF | Body integrated unit input value | Rear washer switch ON |
| Rr Defogger SW | ON/OFF | Body integrated unit input value | Rear defogger switch ON |
| Fr wiper input | ON/OFF | Body integrated unit input value | ON when front wiper is operating |
| Parking Brake SW | ON/OFF | Body integrated unit input value | Parking brake ON |
| Driver's seat lock status SW input |
ON/OFF | Body integrated unit input value | Displays latch state, ON when locked |
| Passenger's seat lock status SW input | ON/OFF | Body integrated unit input value | Displays latch state, ON when locked |
| R gate lock status SW input | ON/OFF | Body integrated unit input value | Displays latch state, ON when locked |
| R Gate Release SW input | ON/OFF | Body integrated unit input value | Rear gate release switch ON |
| Rr Defogger output | ON/OFF | Body integrated unit output value | ON when rear defogger relay is operating |
| lock actuat. LOCK output | ON/OFF | Body integrated unit output value | ON when LOCK signal is output |
| All seat UNLOCK output | ON/OFF | Body integrated unit output value | ON when unlock signal is output |
| D-seat UNLOCK output | ON/OFF | Body integrated unit output value | ON when unlock signal is output |
| R gate/trunk UNLK output | ON/OFF | Body integrated unit output value | ON when rear gate/trunk unlock signal is output |
| Rear Wiper Output | ON/OFF | Body integrated unit output value | ON when rear wiper motor is operating |
| Shift Lock Solenoid | ON/OFF | Body integrated unit output value | ON when shift lock solenoid is operating (only AT) |
| Key lock solenoid output | Lock/Unlock | Body integrated unit output value | LOCK when the key is locked |
| wiper deicer output | ON/OFF | Body integrated unit output value | ON when wiper deicer relay is operating |
| Hazard Output | ON/OFF | Body integrated unit output value | ON when answer-back signal is received or when hazard is operating |
| Keyless Buzzer Output | ON/OFF | Body integrated unit output value | ON when lock/unlock signal is received |
| Horn Output | ON/OFF | Body integrated unit output value | ON when security warning is operating |
| Illumination lamp O/P | ON/OFF | Body integrated unit output value | ON when illumination is illuminated |
| Room lamp output | ON/OFF | Body integrated unit output value | ON when keyless lock/unlock signal is received, or when opening or closing the door |
| key illumi. lamp o/p | ON/OFF | Body integrated unit output value | ON when key illumination light is illuminated |
| Immobilizer lamp output | ON/OFF | Body integrated unit output value | ON when immobilizer pilot light blinks |
| Keyless operation 1 | Regist./Normal | Body integrated unit input value | When keyless ID is registered |
| Keyless operation 2 | Deletion/Normal | Body integrated unit input value | When keyless ID is deleted |
| Small Lamp SW | ON/OFF | Body integrated unit input value | ON when small light is illuminated |
| Headlamp | ON/OFF | Body integrated unit input value | ON when headlight Lo is illuminated |
| High Beam | ON/OFF | Body integrated unit input value | ON when headlight Hi is illuminated |
| Blower fan information | ON/OFF | CAN data input value | Reception from ECM |
| Power rear gate setting | ON/OFF | Body integrated unit setting value | Not applicable (OFF fixed) |
| Back auto rear wiper setting | ON/OFF | Body integrated unit setting value | Not applicable (OFF fixed) |
| XmodeSW setting | ON/OFF | Body integrated unit setting value | Not applicable (OFF fixed) |
| XmodeSW input | ON/OFF | Body integrated unit input value | Not applicable (OFF fixed) |
| XmodeSW output | ON/OFF | Body integrated unit output value | Not applicable (OFF fixed) |
| TPMS Setting | TPMS/No TPMS | Body integrated unit setting value | Customize item |
| Driver's door select unlock | Selection/ALL | Body integrated unit setting value | ALL fixed |
| R gate select unlock | Selection/ALL | Body integrated unit setting value | ALL fixed |
| Lighting I Switch Input | ON/OFF | Body integrated unit input value | Small light switch ON |
| Lighting II Switch Input | ON/OFF | Body integrated unit input value | Headlight switch ON |
| Lighting AUTO input | ON/OFF | Body integrated unit input value | Headlight AUTO switch ON |
| Dimmer Hi Switch Input | ON/OFF | Body integrated unit input value | Dimmer Hi switch ON |
| Dimmer Pass Switch Input | ON/OFF | Body integrated unit input value | Dimmer Pass switch ON |
| Illumination sensor flag | ON/OFF | Body integrated unit setting value | Shows the existence of illumination sensor |
| Lighting I Lamp Output | ON/OFF | Relay drive | ON when small light is illuminated |
| Lighting II Lamp Output | ON/OFF | Relay drive | ON when headlight is illuminated |
| Lighting Hi Lamp Output | ON/OFF | Relay drive | ON when headlight Hi is illuminated |
| Front Fog Lamp Output | ON/OFF | Relay drive | When front fog light relay ON output |
| DRL Cancel Output | ON/OFF | Relay drive | When DRL cancel relay ON output |
| Power Supply Tr | ON/OFF | Inner Tr drive | Headlight auxiliary power supply ON |
| Map lamp output | ON/OFF | Body integrated unit output value | ON when map light is illuminated |
| Luggage/Trunk lamp output | ON/OFF | Body integrated unit output value | ON when luggage/trunk light is illuminated |
| Rear defogger operation mode | Continuous/Normal | Body integrated unit setting value | Customize setting |
| Security Alarm Setup | ON/OFF | Body integrated unit setting value | Customize setting |
| Impact Sensor Setup | ON/OFF | Body integrated unit setting value | Customize setting |
| Alarm delay setup | ON/OFF | Body integrated unit setting value | Customize setting |
| Lockout prevention | ON/OFF | Body integrated unit setting value | Customize setting |
| Impact sensor | ON/OFF | Body integrated unit setting value | Customize setting |
| Buzzer sounding setting | ON/OFF | Body integrated unit setting value | Customize setting |
| Abnormal warning lamp flashing setting | ON/OFF | Body integrated unit setting value | Customize setting |
| Ans.-back Buzzer | ON/OFF | Body integrated unit setting value | Customize setting |
| Passive Alarm | ON/OFF | Body integrated unit setting value | Customize setting |
| Door open warning | ON/OFF | Body integrated unit setting value | Customize setting |
| Dome Light Alarm Setting | ON/OFF | Body integrated unit setting value | Customize setting |
| Auto A/C ECU Setting | ON/OFF | Body integrated unit setting value | Customize setting |
| wiperdeicer | ON/OFF | Body integrated unit setting value | Customize setting |
| Illumination Control On/Off | ON/OFF | Body integrated unit setting value | Customize setting |
| Sedan/Wagon Setting | Sedan/Wagon | Body integrated unit setting value | Customize setting |
| MT/AT Setting | MT/AT | Body integrated unit setting value | Customize setting |
| 6MT Setting | 6MT/Other than 6MT | Body integrated unit setting value | Customize setting |
| Destination Setting | JPN KA, KC KS For Europe LHD other than KS C0, C5 U4, U5, U6, C6 EK, ER |
Body integrated unit setting value | Displays body integrated unit customizing |
| Illumination Sensor Setting | ON/OFF | Body integrated unit setting value | Customize setting |
| Factory initial setting | Market/Factory | Body integrated unit setting value | Displays body integrated unit customizing |
NOTE:
For detailed operation procedures, refer to "PC application help for Subaru Select Monitor".
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.