Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DBβ LIVE
HOMESERVICE MANUALSSUBARU2014IMPREZA SPORT LIMITEDREPAIR AND DIAGNOSIS (SINGLE PAGE)BODY & FRAMEDOOR LOCKSIMMOBILIZER SYSTEM (DIAGNOSTICS)DIAGNOSTIC PROCEDURE WITH DIAGNOSTIC TROUBLE CODE (DTC)DTC B1405: SCU COLLATION NGDTC DETECTING CONDITION
2014 Subaru Impreza Sport Limited
DTC B1405: SCU Collation NG: DTC Detecting Condition
2014 Subaru Impreza Sport LimitedSECTION DTC Detecting Condition
Reference code incompatibility between security control module and body integrated unit
CAUTION:
When the security control module is replaced, registration of the immobilizer system is required. For details, refer to the
"REGISTRATION MANUAL FOR IMMOBILIZER".
DTC PROCEDURE
| Step | Check | Yes | No |
|---|---|---|---|
| 1 CHECK DTC.Β Read the DTC of body integrated unit using Subaru Select Monitor. |
Is any of DTC B1406 or B1409 detected? | Perform the diagnosis according to DTC. | Go to step 2Β . |
| 2 PERFORM SECURITY CONTROL MODULE REGISTRATION.Β Perform security control module registration. Refer to the "REGISTRATION MANUAL FOR IMMOBILIZER". |
Is registration complete? | Finish the diagnosis. | Go to step 3Β . |
| 3 CHECK DTC.Β Read the DTC of body integrated unit using Subaru Select Monitor. |
Is any of DTC B1406 or B1409 detected? | Perform the diagnosis according to DTC. | Replace the security control module. < Ref. to SECURITY CONTROL MODULE .> |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.