Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUBARU2014FORESTER 2.5I, ENG CD FB25BA, STANDARD TRANSREPAIR AND DIAGNOSISHEATING, VENTILATION & A/C (HVAC)HVAC CONTROL SYSTEMSHVAC SYSTEM AUTO A/C (DIAGNOSTICS)READ CURRENT DATALIST
2014 Subaru Forester 2.5i, Eng CD FB25BA, Standard Trans
Read Current Data: List
2014 Subaru Forester 2.5i, Eng CD FB25BA, Standard TransSECTION List
| Items to be displayed | Unit of measure | Content | Note |
|---|---|---|---|
| In-vehicle Sensor Temperature | °C (°F) | A/C control panel input value | - |
| Quantity of Sunload | W/m2 | A/C control panel input value | - |
| A/C Pressure Switch | Normal/Abnormal | A/C control panel input value | - |
| Heater Water Temperature | °C (°F) | Data value received by CAN | - |
| Heater Control Panel Setting Value (Driver's) | LO: 18°C (60°F) HI: 32°C (90°F) | Control panel display value | - |
| Heater Control Panel Setting Value (Passenger's) | LO: 18°C (60°F) HI: 32°C (90°F) | Control panel display value | For models with left/right independent air conditioning function only |
| Blower outlet request temperature (Driver's) | °C (°F) | A/C control panel internal setting value | For models with left/right independent air conditioning function only |
| Blower outlet request temperature (Passenger's) | °C (°F) | A/C control panel internal setting value | For models with left/right independent air conditioning function only |
| Air mix door actuator position (driver's side) | % | A/C control panel input value | - |
| Air mix door actuator position (passenger's side) | % | A/C control panel input value | For models with left/right independent air conditioning function only |
| Mode Door Actuator Position | % | A/C control panel input value | - |
| Fresh/Recircle Air Door Actuator Position | % | A/C control panel input value | - |
| Target air mix door actuator position (driver's side) | % | A/C control panel input value | - |
| Target air mix door actuator position (passenger's side) | % | A/C control panel input value | - |
| Mode Door Actuator Position Target | % | A/C control panel input value | - |
| Fresh/Recircle Air Door Actuator Position Target | % | A/C control panel input value | - |
| Blower Fan Level | Level | A/C control panel internal output value | - |
| Ambient Air Temperature | °C (°F) | Data value received by CAN | - |
| Compressor operation status | OFF/AUTO | A/C control panel input value | - |
| Blower Fan Operating Condition | MANU/AUTO | A/C control panel input value | - |
| A/C Operating Condition | MANU/AUTO | A/C control panel input value | - |
| Fresh/Recircle Air Operating Condition | MANU/AUTO | A/C control panel input value | - |
| Mode Operating Condition | MANU/AUTO | A/C control panel input value | - |
| Rear Defogger | ON/OFF | A/C control panel input value | - |
| Engine Speed | rpm | Data value received by CAN | - |
| Vehicle Speed | km/h | Data value received by CAN | - |
| Evaporator Temperature | °C (°F) | A/C control panel input value | - |
| Evaporator Temperature Target | °C (°F) | A/C control panel input value | - |
| Blower outlet Door Request Temperature | °C (°F) | A/C control panel internal setting value | - |
| PTC permitted number | 0 - 3 | A/C control panel input value | Not supported |
| PTC operation steps | 0 - 3 | A/C control panel input value | Not supported |
| PTC Heater 3 | Inoperative/Operate | A/C control panel input value | Not supported |
| PTC Heater 2 | Inoperative/Operate | A/C control panel input value | Not supported |
| PTC Heater 1 | Inoperative/Operate | A/C control panel input value | Not supported |
| Request engine speed | 0: Without Request 1: Cooler H 2: Heater H 3: Cooler L 4: Heater L |
A/C control panel internal output value | - |
| Heater core Temp. | °C (°F) | A/C control panel input value | Not supported |
|
NOTE:
For detailed operation procedures, refer to
"PC application help for Subaru Select Monitor".
|
|||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.