SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUBARU2014FORESTER 2.5I, ENG CD FB25BA, STANDARD TRANSREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT VARIANT/TRIMSECTION 7 (AUTOMATIC TRANSMISSION CVT (TR690) - SERVICE INFORMATION)TRANSMISSION CASEASSEMBLY
2014 Subaru Forester 2.5i, Eng CD FB25BA, Standard Trans

Transmission Case: Assembly

2014 Subaru Forester 2.5i, Eng CD FB25BA, Standard TransSECTION Assembly
WARNING: This page is about a different variant/trim than selected.
  1. Using the ST, install the oil seal.

    ST 18657AA000 INSTALLER

    Fig 1: Locating Oil Seal
    G06654632Courtesy of SUBARU OF AMERICA, INC.
  2. Using ST1 and ST2, install the ball bearing on the reduction gear side.
    NOTE: Use a new ball bearing.

    ST1 398177700 INSTALLER

    ST2 499755602 PRESS SNAP RING

    Fig 2: Installing Ball Bearing On Reduction Gear Side
    G06654639Courtesy of SUBARU OF AMERICA, INC.
  3. Using ST1 and ST2, install the roller bearing on primary pulley side.
    NOTE:
    • Use a new roller bearing.
    • Make adjustment so that the press gets in contact with the center of ST2.

    ST1 398177700 INSTALLER

    ST2 20299AG010 PRESS SNAP RING

    Fig 3: Installing Roller Bearing On Primary Pulley Side
    G06654640Courtesy of SUBARU OF AMERICA, INC.
  4. Install the snap ring on primary pulley side.
    NOTE: Use new snap rings.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.