Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUBARU2014FORESTER 2.5I, ENG CD FB25BA, STANDARD TRANSREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT VARIANT/TRIMSECTION 7 (AUTOMATIC TRANSMISSION CVT (TR690) - SERVICE INFORMATION)CONVERTER CASE COVERINSTALLATION
2014 Subaru Forester 2.5i, Eng CD FB25BA, Standard Trans
Converter Case Cover: Installation
2014 Subaru Forester 2.5i, Eng CD FB25BA, Standard TransSECTION Installation
WARNING: This page is about a different variant/trim than selected.
- Clean the mating surface of converter case cover and converter case.
- Adjust the shims of front reduction drive gear and front reduction driven gear. < Ref. to ADJUSTMENT , Front Reduction Drive Gear. > < Ref. to ADJUSTMENT , Front Reduction Driven Gear. >
- Apply CVTF to the selected shims and install on the bearing catch surface of the front reduction driven gear.
- Using the ST, install the ball bearing to the converter case cover.NOTE: Use a new ball bearing.
ST 499755602 PRESS SNAP RING
- Install the O-ring.NOTE:
- Use new O-rings.
- Apply CVTF to the O-ring.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.