Air Intake Duct: Removal

2014 Subaru Forester 2.5i, Eng CD FB25BA, Standard TransSECTION Removal
WARNING: This page is about a different variant/trim than selected.
  1. Remove the clip which secures air intake duct (rear), and remove the air intake duct (rear).
    Fig 1: Locating Air Intake Duct Clips
    G09480070Courtesy of SUBARU OF AMERICA, INC.
  2. Remove the clip (A) and four claws and then remove the air intake duct (front).
    Fig 2: Locating Air Intake Duct Claws And Clips
    G09480071Courtesy of SUBARU OF AMERICA, INC.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.