Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSSUBARU2014FORESTER 2.5I, ENG CD FB25BA, STANDARD TRANSREPAIR AND DIAGNOSISBODY & FRAMEWINDOWSGLASS/WINDOW/MIRRORSOUTER MIRROR ASSEMBLYDISASSEMBLY

2014 Subaru Forester 2.5i, Eng CD FB25BA, Standard Trans

Outer Mirror Assembly: Disassembly

2014 Subaru Forester 2.5i, Eng CD FB25BA, Standard TransSECTION Disassembly

CAUTION:

When removing the mirror - repair, be careful not to damage the back surface of mirror - repair with a flat tip screwdriver.
When installing the mirror - repair, insert the connector and clip securely.

Operate the remote control mirror switch to face the mirror - repair upward.
Disconnect the ground cable from battery.
Remove the mirror - repair.
1. Using a flat tip screwdriver, release the clip, and slide the mirror - repair downward to remove.
  
  Fig 1: Removing Mirror Clip
  Courtesy of SUBARU OF AMERICA, INC.
2. Disconnect the mirror heater connector. (Model with mirror heater)
  
  Fig 2: Locating Mirror Heater Connector
  Courtesy of SUBARU OF AMERICA, INC.
Release the claws, and then remove the cover - cap outer mirror lower.

Fig 3: Identifying Outer Mirror Lower Cover Claws
Courtesy of SUBARU OF AMERICA, INC.
Release the claws, and then remove the cover - cap outer mirror.
CAUTION: Be careful not to apply excessive force when removing the cover - cap outer mirror, as the lower hooks may become damaged.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.