SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUBARU2014FORESTER 2.5I PREMIUM, ENG CD FB25BC, AUTOMATIC CVT TRANSREPAIR AND DIAGNOSISENGINE PERFORMANCEENGINE CONTROL SYSTEMSFUEL INJECTION FUEL SYSTEMS (H4DO)ENGINE WIRING HARNESSINSTALLATION
2014 Subaru Forester 2.5i Premium, Eng CD FB25BC, Automatic CVT Trans

Engine Wiring Harness: Installation

2014 Subaru Forester 2.5i Premium, Eng CD FB25BC, Automatic CVT TransSECTION Installation
  1. Route the engine wiring harness around the engine and connect connectors.
    • Structural diagram 1
      Fig 1: Identifying Engine Wiring Harness Diagram 1
      G09475516Courtesy of SUBARU OF AMERICA, INC.

      Tightening torque: N.m (kgf-m, ft-lb) 

      T1: 7.5 (0.8, 5.5) 

      T2: 19 (1.9, 14.0) 

    • Structural diagram 2
      Fig 2: Identifying Engine Wiring Harness Diagram 2
      G09475517Courtesy of SUBARU OF AMERICA, INC.
  2. Install the engine wiring harness.

    Tightening torque: 

    6.4 N.m (0.7 kgf-m, 4.7 ft-lb) 

    Fig 3: Locating Engine Wiring Harness Cover Bolts
    G09475515Courtesy of SUBARU OF AMERICA, INC.
  3. Install the intake manifold. < Ref. to INSTALLATION , Intake Manifold. >
  4. Connect the battery ground terminal.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.