2013 Subaru Outback LimitedFACTORY OEM SERVICE PROCEDURE

Converter Case: Installation

  1. Install the oil pump. Refer to INSTALLATION .
  2. Install the oil pump chain cover. Refer to INSTALLATION .
  3. Install the front differential assembly. Refer to INSTALLATION .
  4. Install the drive pinion shaft assembly. Refer to INSTALLATION .
  5. Install the forward clutch assembly. Refer to INSTALLATION .
  6. Install the reverse brake assembly. Refer to INSTALLATION .
  7. Install the primary pulley, secondary pulley and variator chain. Refer to INSTALLATION .
  8. Install the reduction drive gear. Refer to INSTALLATION .
  9. Install the transmission case. Refer to INSTALLATION .
  10. Install the transmission control device. Refer to INSTALLATION .
  11. Install the oil strainer and oil pan. Refer to INSTALLATION .
  12. Install the reduction driven gear assembly. Refer to INSTALLATION .
  13. Install the transfer driven gear assembly. Refer to INSTALLATION .
  14. Install the transfer clutch assembly. Refer to INSTALLATION .
  15. Install the parking pawl. Refer to INSTALLATION .
  16. Install the extension case. Refer to INSTALLATION .
  17. Install the inhibitor switch. Refer to INSTALLATION .
  18. Install the secondary speed sensor. Refer to INSTALLATION .
  19. Install the primary speed sensor. Refer to INSTALLATION .
  20. Install the turbine speed sensor. Refer to INSTALLATION .
  21. Install the transmission harness. Refer to INSTALLATION .
  22. Install the control valve body. Refer to INSTALLATION .
  23. Install the air breather hose. Refer to INSTALLATION .
  24. Install the transmission assembly to the vehicle. Refer to INSTALLATION .
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.