Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Memory Unit
In addition to storing the current slide/tilt/lifter/reclining positions based on the pulse signals from each motor assembly, registration/call out of preset seat positions is performed by the operation of the memory switch assembly.
The amount of movement for each motor is counted from a reference position, and the counts are recorded by this count. If the counts from the reference position exceeds the limit for some reason, the preset call feature may not operate properly, and initialization will be required in this case.
When a preset seat position is registered or called out, the built-in buzzer will sound.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.