Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
14 Cf-U1 Reprogramming Kit Monitor Use (SUSTIPS 0711-06)
Reference number: SUSTIPS 0711-06
14 CF-U1 REPROGRAMMING KIT MONITOR USE
TECHNICAL INFORMATION TIP
| SUBARU 2006-2010 Forester, Impreza, Legacy, Outback: |
SERVICE INFORMATION
By now, most dealers should have received their CF-U1 kit to assist with reprogramming vehicles coming in for the WVU-31 ECM Service Program Bulletin. Although the device has other capabilities built into it, they are not accessible. The sole function of the unit is to help free-up your SDS Notebook and SDI box providing an additional means to facilitate reprogramming for WVU-31. The Techline has received inquiries from Technicians about how to activate some of the CF-U1's other functions. Please do not try to use the tool for anything else other than for what it was intended.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.